prop question
02-20-2009, 09:03 PM
#1
Senior Member
Thread Starter
My Feedback: (2)
Join Date: Aug 2008
Location: L
Posts: 1,655
Likes: 0
Received 0 Likes
on
0 Posts
prop question
i have a rimfire 35-30-1250 and it only gives information on a 10x7 prop
i would like to try something else that will give me more torque
would a gws 11x4.7 fry my motor?
any other options
i would like to try something else that will give me more torque
would a gws 11x4.7 fry my motor?
any other options
02-21-2009, 09:36 AM
#2
Senior Member
Join Date: Jun 2005
Location: Prescott Valley,
AZ
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
RE: prop question
I would first try putting the new prop and motor on a watt meter. That way you can see the current change and prevent drawing to much for your setup. I believe a Watt meter is a must for electric flying. You can find them online for around 40 to 50 bucks.
02-21-2009, 09:56 AM
#3
Senior Member
Join Date: Jan 2004
Location: Kuala Lumpur, MALAYSIA
Posts: 10,489
Likes: 0
Received 2 Likes
on
2 Posts
RE: prop question
If its safe for a 10x7 then an 11x4.7 will be no issue. Nevertheless, get a wattmeter, its a CHEAP investment that will save your EXPENSIVE investments.
