Charging Lipo's without a balance connector:
07-11-2009, 11:59 AM
#1
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Mckinleyville,
CA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Charging Lipo's without a balance connector:
I have a "Vision Peak Ultra" (VPU) charger. Cheap but it has worked for me. Now as I buy newer LiPo batteries they all have a balancing charge connector, whereas before my 11.1V LiPo's just had a 2 lead charging jack. The VPU charger doesn't do balanced charging. Can I charge my batteries via the batterie's power "out" (to airplane) leads?
07-11-2009, 01:58 PM
#3
Junior Member
Thread Starter
Join Date: Mar 2006
Location: Mckinleyville,
CA
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
RE: Charging Lipo's without a balance connector:
That's brilliant advice "guver" (or is it "goober"). Seems like I've seen that bright light of yours shine with the same comment in other strings. I guess when you get a "good one" you stick with it. Thanks for the advice.
07-11-2009, 02:14 PM
#4
Senior Member
My Feedback: (325)
Join Date: Mar 2003
Location: LaGrange, OH
Posts: 14,857
Likes: 0
Received 0 Likes
on
0 Posts
RE: Charging Lipo's without a balance connector:
I'm not sure if you refer to the sig, the "delete" or this advise http://www.rcuniverse.com/forum/fb.asp?m=8924182 
I figured to answer in the batt/charger section was best.
I figured to answer in the batt/charger section was best.
