Micro videos
#26
Senior Member
Thread Starter
Join Date: May 2006
Location: lost coast,
CA
Posts: 7,007
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
Here's the mSR from a little over a week ago. I need to watch some videos
[youtube]http://www.youtube.com/watch?v=NCyu__-8CRU[/youtube]
Tim
[youtube]http://www.youtube.com/watch?v=NCyu__-8CRU[/youtube]
Tim
#28
Senior Member
Thread Starter
Join Date: May 2006
Location: lost coast,
CA
Posts: 7,007
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
Here's a video of the Pitts shockflyer. We were in a bit of a lull between storms so the cloudscape is nice as well.
Tim
[youtube]http://www.youtube.com/watch?v=Z5TKA3AMKOY[/youtube]
Tim
[youtube]http://www.youtube.com/watch?v=Z5TKA3AMKOY[/youtube]
#31
Senior Member
Thread Starter
Join Date: May 2006
Location: lost coast,
CA
Posts: 7,007
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
Here is the debut of the newest P-51 video. I hope someone sees it here[&:]
Tim
[youtube]http://www.youtube.com/watch?v=cx42dmep7Ic[/youtube]
Tim
[youtube]http://www.youtube.com/watch?v=cx42dmep7Ic[/youtube]
#32
Junior Member
Join Date: Jul 2011
Location: Las Vegas, NV
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
couple videos from tuesdays indoor flying
glad to have found a new forum
#33
Senior Member
My Feedback: (1)
Join Date: Oct 2005
Location: Fort Worth,
TX
Posts: 1,241
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
Cool thread, Fern, nice vids too
Took them a year to take up my recommendation to make a micro Stryker, but better late than never!
The videos I've seen of the F-27Q dont look half bad, but it definitely needs a 3rd cell to get some real speed. Mine ended up being heavier at around 3oz, but on 3S lipos, it'll hit 70mph or more in a straight line, no idea what it'll do in a dive...its scary fast, just how I like it, and its probably one of my all time favorite planes I've ever flown or built. I think I've got a thread on it somewhere around here, but its probably back many pages.
Nick
[youtube]http://www.youtube.com/watch?v=AoHw5rvl2mo[/youtube]
Edit: Hey Fern how do you embedding your videos?
Edit again...thanks!!
Took them a year to take up my recommendation to make a micro Stryker, but better late than never!
The videos I've seen of the F-27Q dont look half bad, but it definitely needs a 3rd cell to get some real speed. Mine ended up being heavier at around 3oz, but on 3S lipos, it'll hit 70mph or more in a straight line, no idea what it'll do in a dive...its scary fast, just how I like it, and its probably one of my all time favorite planes I've ever flown or built. I think I've got a thread on it somewhere around here, but its probably back many pages.
Nick
[youtube]http://www.youtube.com/watch?v=AoHw5rvl2mo[/youtube]
Edit: Hey Fern how do you embedding your videos?
Edit again...thanks!!
#34
Senior Member
Join Date: Jul 2010
Location: Galveston,
TX
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
Just watched itFerndale Air Force, and seeing the Microstare down the wind makes me want to hit the skies, too. First, what battery? Good flight time! I love the Thunder Power 160s.Second, do you feel having the landing gear on gives her more stability? Sure looks it.
Thanks for taking the time to post your vids!
Solo man Sakai.
Thanks for taking the time to post your vids!
Solo man Sakai.
#35
Senior Member
Thread Starter
Join Date: May 2006
Location: lost coast,
CA
Posts: 7,007
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
First up, how to embed a video, in the reply box there is a button marked youtube this is what you get when you click it, [youtube][/youtube] Next put the cursor in between the parentheses and paste your video.
Micro, I wondered if you had seen the little stryker.
Saburo I am flying the HK turnigy 160's. As for the lg, I lake to rog whenever possible.
I guess it is time for some new video, And I certainly have some Enjoy
How about the 26' Sbach clone, BOC version, http://www.badiusownersclub.com/vide...h%209Aug11.wmv
[youtube]http://www.youtube.com/watch?v=MWYO1NxaXqQ[/youtube]
And then a little Extra, BOC version http://www.badiusownersclub.com/vide...043%20prop.wmv
[youtube]http://www.youtube.com/watch?v=btBRlz2dCkc[/youtube]
And the mCPX, BOC http://www.badiusownersclub.com/vide...20Aug%2011.wmv
[youtube]http://www.youtube.com/watch?v=bz_43TVMnzw[/youtube]
Micro, I wondered if you had seen the little stryker.
Saburo I am flying the HK turnigy 160's. As for the lg, I lake to rog whenever possible.
I guess it is time for some new video, And I certainly have some Enjoy
How about the 26' Sbach clone, BOC version, http://www.badiusownersclub.com/vide...h%209Aug11.wmv
[youtube]http://www.youtube.com/watch?v=MWYO1NxaXqQ[/youtube]
And then a little Extra, BOC version http://www.badiusownersclub.com/vide...043%20prop.wmv
[youtube]http://www.youtube.com/watch?v=btBRlz2dCkc[/youtube]
And the mCPX, BOC http://www.badiusownersclub.com/vide...20Aug%2011.wmv
[youtube]http://www.youtube.com/watch?v=bz_43TVMnzw[/youtube]
#37
Senior Member
My Feedback: (1)
Join Date: Oct 2005
Location: Fort Worth,
TX
Posts: 1,241
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
Thanks for the heads up on embedding the videos, that was driving me nuts.
How do you like the mCPX, is it comparable to the mSR other than it being 3D? Been waiting a long time for them to do something like that, sure do want one.
Thanks,
Nick
How do you like the mCPX, is it comparable to the mSR other than it being 3D? Been waiting a long time for them to do something like that, sure do want one.
Thanks,
Nick
#38
Senior Member
Thread Starter
Join Date: May 2006
Location: lost coast,
CA
Posts: 7,007
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
No problem Nick, figuring that out drove me a bit nuts as well.
I was just out flying the heli and pondering how to answer your question. Here is my analogy. The mCX is like a slowstick, or to stay with micros, perhaps the Cub, very simple to fly once you grasp the concept. A 3 channel craft. The mSR is a 4 channel craft with 2 levels of control, but you do not need much aileron input to fly. I have my mSR maxed and de-expo'd. The mCPX needs constant aileron and elevator, but the tail stays solid.
All that said, this is a great heli, the gyro system is awesome. If you can fly the mSR you can get the mCPX. The trick for me was learning to launch. You have to get the rotor disk flat then pop the heli into the air. Learning to fly it indoors would be far more optimal than the way I did.
Tim
I was just out flying the heli and pondering how to answer your question. Here is my analogy. The mCX is like a slowstick, or to stay with micros, perhaps the Cub, very simple to fly once you grasp the concept. A 3 channel craft. The mSR is a 4 channel craft with 2 levels of control, but you do not need much aileron input to fly. I have my mSR maxed and de-expo'd. The mCPX needs constant aileron and elevator, but the tail stays solid.
All that said, this is a great heli, the gyro system is awesome. If you can fly the mSR you can get the mCPX. The trick for me was learning to launch. You have to get the rotor disk flat then pop the heli into the air. Learning to fly it indoors would be far more optimal than the way I did.
Tim
#39
Senior Member
My Feedback: (1)
Join Date: Oct 2005
Location: Fort Worth,
TX
Posts: 1,241
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
Hmmm...well I can fly the heck out of the mSR, it was a great trainer. ParkZone sure has released a lot of cool planes, but this heli might have to take the top spot in the "empty my wallet" line up. What TX are you using?
Nick
edit: just uploaded an older video of me flying the mSR. Only had it a few days at this point so I was still pretty rough on the sticks, but after a week or so she was cruising!!
[youtube]http://www.youtube.com/watch?v=It9ilagtBNM[/youtube]
Nick
edit: just uploaded an older video of me flying the mSR. Only had it a few days at this point so I was still pretty rough on the sticks, but after a week or so she was cruising!!
[youtube]http://www.youtube.com/watch?v=It9ilagtBNM[/youtube]
#40
Senior Member
Thread Starter
Join Date: May 2006
Location: lost coast,
CA
Posts: 7,007
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
Nick I am using a DX7. I have my mSR at 100% and no expo on the advanced pegs on the swash.
New hovering practice video,
BOC version http://www.badiusownersclub.com/vide...20Aug%2011.wmv
YT version [youtube]http://www.youtube.com/watch?v=suZrqtxEYn8[/youtube]
And Extra video
BOC http://www.badiusownersclub.com/vide...20Aug%2011.wmv
And YT version [youtube]http://www.youtube.com/watch?v=SdOqwNPPeH8[/youtube]
New hovering practice video,
BOC version http://www.badiusownersclub.com/vide...20Aug%2011.wmv
YT version [youtube]http://www.youtube.com/watch?v=suZrqtxEYn8[/youtube]
And Extra video
BOC http://www.badiusownersclub.com/vide...20Aug%2011.wmv
And YT version [youtube]http://www.youtube.com/watch?v=SdOqwNPPeH8[/youtube]
#41
Senior Member
Thread Starter
Join Date: May 2006
Location: lost coast,
CA
Posts: 7,007
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
Here's the latest heli vid. I am at 100% rates and 5% expo. Learning to fly the mSR helped my 3D flying. Learning to fly the mCPX is even better.
[youtube]http://www.youtube.com/watch?v=abx4evRxRWA[/youtube]
[youtube]http://www.youtube.com/watch?v=abx4evRxRWA[/youtube]
#42
Senior Member
Thread Starter
Join Date: May 2006
Location: lost coast,
CA
Posts: 7,007
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
Here's a new video for your enjoyment
Tim
Badius Version, http://www.badiusownersclub.com/vide...20Sep%2011.wmv
YouTube version, [youtube]http://www.youtube.com/watch?v=HioSG49C9SM[/youtube]
Tim
Badius Version, http://www.badiusownersclub.com/vide...20Sep%2011.wmv
YouTube version, [youtube]http://www.youtube.com/watch?v=HioSG49C9SM[/youtube]
#43
Senior Member
Thread Starter
Join Date: May 2006
Location: lost coast,
CA
Posts: 7,007
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
Another video, this time of the mCPX ;D ;D
Tim
Badius version, http://www.badiusownersclub.com/vide...%2015Sep11.wmv
YouTube version, [youtube]http://www.youtube.com/watch?v=XYiiurkiOO8[/youtube]
Tim
Badius version, http://www.badiusownersclub.com/vide...%2015Sep11.wmv
YouTube version, [youtube]http://www.youtube.com/watch?v=XYiiurkiOO8[/youtube]
#45
Senior Member
Thread Starter
Join Date: May 2006
Location: lost coast,
CA
Posts: 7,007
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
First video of the Profile um-SU26. More video to follow.
Tim
Badius, http://www.badiusownersclub.com/video/SU-26%20Profile
Youtube, http://www.youtube.com/watch?v=SADWBuNbrp8
Tim
Badius, http://www.badiusownersclub.com/video/SU-26%20Profile
Youtube, http://www.youtube.com/watch?v=SADWBuNbrp8
#47
Senior Member
Thread Starter
Join Date: May 2006
Location: lost coast,
CA
Posts: 7,007
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
I traced an SU-26 fuse and wing and cut it out of thin foam. It has all of the gear from a regular Sukhoi, except I have two aileron servos.
Tim
Tim
#48
Member
Join Date: Sep 2010
Location: Smithville, MO
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
This is a plane that me and my Dad built and kitting out. This is a link to my thread in Indoor Micro section:
http://www.rcgroups.com/forums/showthread.php?t=1122519
DH.2 SPECIFICATIONS:
Wingspan……… 13 3/8’’
Length…………. 11 13/16’’
Weight…………. 27 grams
3 or 4 channels
Thread or push rod controls
The Kits are $40.00 plus shipping just private message us with your address and zip and we will give the price. We use Paypal. This is a work of love and a lot of fun doing this.
Scott and Mike
Vid of the DH2 flying. This one was taken at the KC fun fly at the TWA air museum.
http://www.youtube.com/watch?v=QebMGpGzE74
#49
Senior Member
Thread Starter
Join Date: May 2006
Location: lost coast,
CA
Posts: 7,007
Likes: 0
Received 0 Likes
on
0 Posts
RE: Micro videos
Modesigner your bird is awesome!! I hope you are able to sell some and the rights[X(] I can't fly it as I no indoor space.
Here is a heli flight. I am working on the hard shake.
Tim
[youtube]http://www.youtube.com/watch?v=z7kDJ48m_2U[/youtube]
Here is a heli flight. I am working on the hard shake.
Tim
[youtube]http://www.youtube.com/watch?v=z7kDJ48m_2U[/youtube]