1.25oz 3D Flyer - The Violator
#1
Member
Thread Starter
Join Date: Jul 2003
Location: Amherst, NY
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
1.25oz 3D Flyer - The Violator
Here is a video of us testing out our prototype 3D flyer. The motor in the video is a prototype motor. The production motor will output 60+ grams of thrust @ 3.5v which is more thrust then the prototype shown in the video.
http://www.smallrc.com/forum/vb_juke...main&mysong=69
Stats:
Name: Violator
AUW: 36 grams
Wingspan: 15"
Motor: Microbatics BL prototype
Prop: 5x3
Speed Control: Microbatics BLC-1 (.5g 3amps w/4amp burst)
Servos: PinPoint Servos
Battery: Microbatics 300mah 15c cell
Duration: 10-15 minutes
Reciever: JMP
Regards,
Dan Hurd
DWE
www.smallrc.com
http://www.smallrc.com/forum/vb_juke...main&mysong=69
Stats:
Name: Violator
AUW: 36 grams
Wingspan: 15"
Motor: Microbatics BL prototype
Prop: 5x3
Speed Control: Microbatics BLC-1 (.5g 3amps w/4amp burst)
Servos: PinPoint Servos
Battery: Microbatics 300mah 15c cell
Duration: 10-15 minutes
Reciever: JMP
Regards,
Dan Hurd
DWE
www.smallrc.com
#2
Member
Thread Starter
Join Date: Jul 2003
Location: Amherst, NY
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
RE: 1.25oz 3D Flyer - The Violator
Here is some video of the Prototype being flown at the NEAT indoor event.
http://www.smallrc.com/forum/vb_juke...main&mysong=71
http://www.smallrc.com/forum/vb_juke...main&mysong=71