Plettenberg Advance and CC80HV
01-13-2012, 08:35 AM
#1
Senior Member
Thread Starter
Join Date: Dec 2009
Location: Willow Point,
BC, CANADA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Plettenberg Advance and CC80HV
Hey Guys
Just maidened my Wind Pro yesterday and it flys great. I do however have a "clicking sound" at throttle settings greater than 3/4. I am wondering if I have to change some of the CC80HV settings to get rid of it. The motor has tons of power and battery/ESC/motor temps are very low after a 6 minute flight. Has anyone experience with this motor/ESC combo and if so can you suggest some settings for the ESC especially in regards to timing?
Thanks
MJ
Just maidened my Wind Pro yesterday and it flys great. I do however have a "clicking sound" at throttle settings greater than 3/4. I am wondering if I have to change some of the CC80HV settings to get rid of it. The motor has tons of power and battery/ESC/motor temps are very low after a 6 minute flight. Has anyone experience with this motor/ESC combo and if so can you suggest some settings for the ESC especially in regards to timing?
Thanks
MJ
01-13-2012, 02:03 PM
#3
My Feedback: (11)
Join Date: Jul 2003
Location: Tracy,
CA
Posts: 2,080
Likes: 0
Received 0 Likes
on
0 Posts
RE: Plettenberg Advance and CC80HV
You have to clear your data logging every few flights. Mine did that also. Now I just don't have it on unless I want to log a flight.
Chris
Chris
01-14-2012, 09:43 AM
#4
Senior Member
Thread Starter
Join Date: Dec 2009
Location: Willow Point,
BC, CANADA
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
RE: Plettenberg Advance and CC80HV
Thanks for the info guys. Now that it is mentioned I do have a neuron firing about it. I'll disable the logging today.
Thanks again
MJ
Thanks again
MJ
