speed controller
#1
Thread Starter
Join Date: Mar 2006
Location: mt shasta, CA
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
speed controller
Iam building the lightning and putting hacker A60-7 V2 motor it is 28 pole. Is there a speed controller besides the spin 99 that I can use thanks . Steve
#8
My Feedback: (53)
Yes JETI is very good I also have 2 radio's from them and I'm using the Mezon.....but not knowing the level of electric knowledge of the 69roadrunner...I do have to point out that the amps pulled has really nothing to do with the ESC as per say...its a function of the motor / prop and battery combination....it could be a Turnigy it would pull the same Amps, the only difference is how it's working in relation with the motor, some ESC don't play nice with certain motor i.e. CC with Q Hacker motors....
#10
Thread Starter
Join Date: Mar 2006
Location: mt shasta, CA
Posts: 412
Likes: 0
Received 0 Likes
on
0 Posts
Dansy Thank you for the help Iam new to big elec. I fly big gas but want to move to elec Iam running the hacker motor on ten cell will run servos on a a123 so dont need bec .What is a opto Thanks Steve
#12
69roadrunner - OPTO means optically isolated - so there is no electrical conection from the ESC to the Rx, the throttle signal is received via an opto-coupler - OPTO ESC's are usualy for high cell counts - theory being that the high voltages & currents being switched by the ESC could cause noise interference in the Rx via an electricaly connected path.
Steve
Steve