Mejzlik 20x13EL 3 Blade
#1
Member
Thread Starter
Join Date: Oct 2009
Location: Amersfoort, NETHERLANDS
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Mejzlik 20x13EL 3 Blade
Any experiences with this new prop ?
Is there someone who measured the current draw for the new Mejzlik 3 blade 20x13EL prop in combination with the 13XS and/or 14XS motor ?
On the website of F3A Lorenz they advise the 20x13EL 3 blade for the 13XS motor not the 14XS motor.
Seems a but strange because it seems logic to me that a 20x13 2 blade prop is for the 13XS and a 21x13 is for the 14XS.
So a 3 blade 20x13 would be for the 14XS not the 13XS right ?
Is there someone who measured the current draw for the new Mejzlik 3 blade 20x13EL prop in combination with the 13XS and/or 14XS motor ?
On the website of F3A Lorenz they advise the 20x13EL 3 blade for the 13XS motor not the 14XS motor.
Seems a but strange because it seems logic to me that a 20x13 2 blade prop is for the 13XS and a 21x13 is for the 14XS.
So a 3 blade 20x13 would be for the 14XS not the 13XS right ?
#2
My Feedback: (5)
I have used this prop on the Plettenberg Advance. I noticed that I see an increase in power consumption between 100 and 200mah when compared to the Falcon 21x13.5 two blade prop.
I think this prop works great in my Bi Side with the Plettenberg Advance. I have not seen it in use with anything else, but I really like it in my setup.
I think this prop works great in my Bi Side with the Plettenberg Advance. I have not seen it in use with anything else, but I really like it in my setup.