Chip Hyde Finals Touch biplane
#1
Thread Starter
My Feedback: (3)
Chip Hyde Finals Touch biplane
Just came across what I think is a new F3A biplane this morning ... the rudder/vertical stab looks very large.
http://www.oxai-japan.com/photogalle...uch/index.html
http://www.hobbynet-jp.com/japan/index.html (price is ~$5800 based on 100yen / USD)
[TABLE="width: 80%"]
[TR]
[TD="bgcolor: #999999, colspan: 2"]Specification:[/TD]
[/TR]
[TR]
[TD="width: 120"]Design by[/TD]
[TD]Chip Hyde[/TD]
[/TR]
[TR]
[TD="width: 120"]Wingspan[/TD]
[TD]1740mm[/TD]
[/TR]
[TR]
[TD="width: 120"]Length[/TD]
[TD]1994mm[/TD]
[/TR]
[TR]
[TD="width: 120"]Wing area[/TD]
[TD]91.0dm2[/TD]
[/TR]
[TR]
[TD="width: 120"]Stabilizer area[/TD]
[TD]16.8dm2[/TD]
[/TR]
[TR]
[TD="width: 120"]Spinner diameter[/TD]
[TD]82mm[/TD]
[/TR]
[TR]
[TD="width: 120"]C.G[/TD]
[TD]153mm at the root of bottom wing[/TD]
[/TR]
[TR]
[TD="width: 120"]Aileron servo[/TD]
[TD]BLS173SV X4[/TD]
[/TR]
[TR]
[TD="width: 120"]Elevator servo[/TD]
[TD]BLS173SV X2[/TD]
[/TR]
[TR]
[TD="width: 120"]Rudder servo[/TD]
[TD]BLS171SV[/TD]
[/TR]
[TR]
[TD="width: 120"]Net weight[/TD]
[TD]EP-2350g GP-2500g[/TD]
[/TR]
[TR]
[TD]EP motor[/TD]
[TD]OXAI Dymaxion F3A motor Hacker Q-80 or other[/TD]
[/TR]
[TR]
[TD="width: 120"]GP motor[/TD]
[TD]YS-175-185[/TD]
[/TR]
[TR]
[TD="width: 120"]RC system[/TD]
[TD]6ch[/TD]
[/TR]
[/TABLE]
http://www.oxai-japan.com/photogalle...uch/index.html
http://www.hobbynet-jp.com/japan/index.html (price is ~$5800 based on 100yen / USD)
[TABLE="width: 80%"]
[TR]
[TD="bgcolor: #999999, colspan: 2"]Specification:[/TD]
[/TR]
[TR]
[TD="width: 120"]Design by[/TD]
[TD]Chip Hyde[/TD]
[/TR]
[TR]
[TD="width: 120"]Wingspan[/TD]
[TD]1740mm[/TD]
[/TR]
[TR]
[TD="width: 120"]Length[/TD]
[TD]1994mm[/TD]
[/TR]
[TR]
[TD="width: 120"]Wing area[/TD]
[TD]91.0dm2[/TD]
[/TR]
[TR]
[TD="width: 120"]Stabilizer area[/TD]
[TD]16.8dm2[/TD]
[/TR]
[TR]
[TD="width: 120"]Spinner diameter[/TD]
[TD]82mm[/TD]
[/TR]
[TR]
[TD="width: 120"]C.G[/TD]
[TD]153mm at the root of bottom wing[/TD]
[/TR]
[TR]
[TD="width: 120"]Aileron servo[/TD]
[TD]BLS173SV X4[/TD]
[/TR]
[TR]
[TD="width: 120"]Elevator servo[/TD]
[TD]BLS173SV X2[/TD]
[/TR]
[TR]
[TD="width: 120"]Rudder servo[/TD]
[TD]BLS171SV[/TD]
[/TR]
[TR]
[TD="width: 120"]Net weight[/TD]
[TD]EP-2350g GP-2500g[/TD]
[/TR]
[TR]
[TD]EP motor[/TD]
[TD]OXAI Dymaxion F3A motor Hacker Q-80 or other[/TD]
[/TR]
[TR]
[TD="width: 120"]GP motor[/TD]
[TD]YS-175-185[/TD]
[/TR]
[TR]
[TD="width: 120"]RC system[/TD]
[TD]6ch[/TD]
[/TR]
[/TABLE]
#2
Thread Starter
My Feedback: (3)
Some more photos...interesting treatment on the underside of the stab near the fuselage and the bottom of the fuse
http://www.hobbynet-jp.com/blog2/?p=601
http://www.hobbynet-jp.com/blog2/?p=601
#3
My Feedback: (41)
Hey Lewis we have yet to list it on F3AUnlimited.com because there are modifications being made. Once we get the Final Final's Touch it will be up for sale.
We are however taking preorders on them and have a lot of interest.
I've talked to a number of people who flew Chip's prototype and received glowing reports back on how well it flew and looked in the air. Unfortunatly the plane met an early demise due to a complete loss of signal. Chip was really counting on having it at the Nationals. It bummed us all out not getting to see him compete with it.
I'll monitor this thread and keep everyone abreast of the situation as far as when it will be 100% completed and ready to go.
Mike Mueller
800 591 2875
We are however taking preorders on them and have a lot of interest.
I've talked to a number of people who flew Chip's prototype and received glowing reports back on how well it flew and looked in the air. Unfortunatly the plane met an early demise due to a complete loss of signal. Chip was really counting on having it at the Nationals. It bummed us all out not getting to see him compete with it.
I'll monitor this thread and keep everyone abreast of the situation as far as when it will be 100% completed and ready to go.
Mike Mueller
800 591 2875