hobbico mkii and lipos
#1
Junior Member
Thread Starter
Join Date: Apr 2004
Location: PIEDRAS, SPAIN
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
hobbico mkii and lipos
Hi guys,
i bought the mkii charger, a kokam 2 cell 1500 and etech 2 cell 1200 and i have a pair of questions.
What amp use to charge the kokam and the etech....0.2? How many time does it to charge? same question with the etech.
Other question is what are the positive and the negative wire in the etech battery, i have a pink and a blue wire, which join to black and red, i want join both to a wires with a bec conector.
I have an aerohawk (stock motor) and a piccolo pro (410 motor), how many time can fly with this batteries without discharge the lipos excesively to warm it.
Thanks in advance and excuse my english.
i bought the mkii charger, a kokam 2 cell 1500 and etech 2 cell 1200 and i have a pair of questions.
What amp use to charge the kokam and the etech....0.2? How many time does it to charge? same question with the etech.
Other question is what are the positive and the negative wire in the etech battery, i have a pink and a blue wire, which join to black and red, i want join both to a wires with a bec conector.
I have an aerohawk (stock motor) and a piccolo pro (410 motor), how many time can fly with this batteries without discharge the lipos excesively to warm it.
Thanks in advance and excuse my english.
#2
Member
Join Date: Feb 2004
Location: perth, AUSTRALIA
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
RE: hobbico mkii and lipos
for ure first question- u should charge them both up at about 1.2A, or 1A, as that is how high ure charger can go. it is recomended to charge up LiPo packs at 0.7C ( 70% of there full capacity), but some packs can handle up to 1C.
second question- on the etech pink=positive, blue=negative
third question- what du u mean?
i hope that this is of some help
swanne
happy flying
second question- on the etech pink=positive, blue=negative
third question- what du u mean?
i hope that this is of some help
swanne
happy flying