Dragonus II Elite geeting confused
#1
Junior Member
Thread Starter
Join Date: Jan 2007
Location: Cape Town, SOUTH AFRICA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Dragonus II Elite geeting confused
I have a Dragonus II Elite helicopter. My radio is a JR 9x and my receiver is a 3rd party make. Cant remember it off hand.
My problem is the machine flies beautifully for quite some time. Then, after a while (typically when I am flying it high) it seems to have a glitch that comes through it. This glitch lasts less than a second but comms with the helicopter is suspended during this time. This is ofcourse catastrophic at times.
What could my problem be?
My local radio shop says interference. They also say I need a JR receiver that is matched to the transmitter and that I need one of the new ones with interference protection. Is this true? Logic tells me, any receiver should work with any transmitter.
HELP - Anyone out there ...?
My problem is the machine flies beautifully for quite some time. Then, after a while (typically when I am flying it high) it seems to have a glitch that comes through it. This glitch lasts less than a second but comms with the helicopter is suspended during this time. This is ofcourse catastrophic at times.
What could my problem be?
My local radio shop says interference. They also say I need a JR receiver that is matched to the transmitter and that I need one of the new ones with interference protection. Is this true? Logic tells me, any receiver should work with any transmitter.
HELP - Anyone out there ...?
#2
Senior Member
Join Date: Sep 2006
Location: yucca valley ,
CA
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
RE: Dragonus II Elite geeting confused
sounds like that could most likely be the problem. but their is a solution. get a really good receiver such as the Berg 7p. it will most likely cancel out the outside signal.
http://www.castlecreations.com/produ...7-channel.html
http://www.castlecreations.com/produ...7-channel.html