FenderBean

I was wondering if the edf/esc would run on 4cells instead of the 3?
Just wondering I plugged in two 7.4v 5000mah packs to just run the motors for a sec
Only reason I'm asking is the fact that I don't two 11.1 3600 packs yet.
The fans are 70mm and it's like a 50 amp esc with 5 amp bec

Kmarks

My Feedback: (36)

If you have the new BH Mig 29 twin 70 mm jet with electric retracts let me give you a heads up. I bought the kit version and was very impressed with everything about this jet. I had 4 great flights on it, but on the 5th flight the left elevator broke off the plastic shaft mount and the plane crashed.

Please dissasemble the elevator from the plastic shaft drill a hole through the shaft and insert a cross shaft. reglue into foam elevator. This way there will be cross stress spread out into the elevator.

By the way, BH has the absolutly worst customer service and denied any claim I had.

Best Regards

Kevin Marks

Wap4life

My Feedback: (3)

did you get the radio with yours?  If so do you know how to bind it.

thanks for the tip kmarks.

Wap4life

My Feedback: (3)

just figured it out all is good.

Wap4life

My Feedback: (3)

have you had issues with your 360 thrust vectoring, i can't get it to work.  Everything else work.