5" Fiberglass Fan Adaptors
#1
Member
Thread Starter
My Feedback: (77)
Join Date: Jan 2002
Location: Plantation,
FL
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
5" Fiberglass Fan Adaptors
I have been working on several adaptors to allow setting up with some of the 5" fans..here are a few pictures...All can be used with the Dynamax,Ramtec,Turbax...
Duct #1 in Blue Sprectre is 6" length..6" inlet and 5"outlet....Duct #2 in Red Arrow is 5" length 5 5/8" inlet and 5" outlet(full length 6 1/2"..inlet5 5/8"...outlet 4 3/4").....Duct #3 is shown as a short tail pipe for Turbax..can also be an inlet pipe for 100 mm fans..6 3/4" length..inlet 5"..outlet 3 7/8".....Duct #4 Bellmouth..length 11 5/8"....Inlet 7 3/8"...outlet 3 9/16"....front of bellmouth can be used for test stand setup....cut at about 3"...from outlet at 8" length ..inlet 4 3/4"....from outlet at 9"..inlet 5 1/8"....working on several others....will be putting them up for sale in about a week...Jim
Duct #1 in Blue Sprectre is 6" length..6" inlet and 5"outlet....Duct #2 in Red Arrow is 5" length 5 5/8" inlet and 5" outlet(full length 6 1/2"..inlet5 5/8"...outlet 4 3/4").....Duct #3 is shown as a short tail pipe for Turbax..can also be an inlet pipe for 100 mm fans..6 3/4" length..inlet 5"..outlet 3 7/8".....Duct #4 Bellmouth..length 11 5/8"....Inlet 7 3/8"...outlet 3 9/16"....front of bellmouth can be used for test stand setup....cut at about 3"...from outlet at 8" length ..inlet 4 3/4"....from outlet at 9"..inlet 5 1/8"....working on several others....will be putting them up for sale in about a week...Jim