3D PRINTED JET ALBATROS edf Fiendfan 60 mm
07-12-2017, 06:44 AM
#1
Thread Starter
Join Date: Oct 2014
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
3D PRINTED JET ALBATROS edf Fiendfan 60 mm
I would like to introduce you to a model that is printed on a 3d printer.
This is the model Albatros L-39 on an exact scale.
Length 1000 mm Model weight 560 g Flight weight 1090.
Flat load 87g / dm2
The model is printed with a 0.2 mm nozzle made of ABS
EDF Fiendfan 60 mm, static thrust 1050 g, 3s lipol 70 A max
Motor Tenshock EDF 1515/10 - 5500 KV
This is the model Albatros L-39 on an exact scale.
Length 1000 mm Model weight 560 g Flight weight 1090.
Flat load 87g / dm2
The model is printed with a 0.2 mm nozzle made of ABS
EDF Fiendfan 60 mm, static thrust 1050 g, 3s lipol 70 A max
Motor Tenshock EDF 1515/10 - 5500 KV
03-31-2019, 09:06 AM
#4
Thread Starter
Join Date: Oct 2014
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
