What size plane will this push around
#1
Member
Thread Starter
My Feedback: (1)
Join Date: Jan 2005
Location: O\'Fallon,
MO
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
What size plane will this push around
Well i have a Mini T that i am done playing with and i am wanting to transfrer the motor and esc to a new plane, i have a mamba 6800 and a quark 33 esc, what size plane will this combo push around???
I see the http://www2.towerhobbies.com/cgi-bin...?&I=LXFZZ5&P=0 but was wondering if anyone has any other suggestions of a nice plane.
I see the http://www2.towerhobbies.com/cgi-bin...?&I=LXFZZ5&P=0 but was wondering if anyone has any other suggestions of a nice plane.
#2
Join Date: Jul 2005
Location: Hamilton,
ON, CANADA
Posts: 5,522
Likes: 0
Received 6 Likes
on
6 Posts
RE: What size plane will this push around
If you are planning on using that motor system I would gear it down 5:1 and stick with a 2 cell LiPo. Somewhere around the 9X3.8 prop range. Look for a high wing trainer around the 40" wingspan range.
That motor is typically not used for planes as the KV is very high. Avoid direct Drive
Ryan
That motor is typically not used for planes as the KV is very high. Avoid direct Drive
Ryan