elador

hi

i'm converting a nitro plane to electric and need help with configuring the power and parts

the plane is mig-27 foam model covered with fiber glass. weight is about 10lb empty

as this is kind of a pig in the sky 1.8X1.7Meter i want it to fly as long as possible

for the moment the only information i found on net was this setup:

motor - hextronik hxt63-64b (280kv)

batt - 6s - which is good cause i already have 2 of those

prop - 20X8 - as my plane at the moment has no landing gear i thought about graupner cam folding prop

amp - 38.5

thrust - 6kg - which is kind of low for my plane (i guess)

any help regarding power setup will be much appreciated as i'm kind of new to the diy part of this great hobby and up until now i only had rtf planes

Twin_Flyer

My Feedback: (4)

It might help if you put your request in the glow to electrics forum!

This is for electrics to glow!

Bill S.

elador

thanks
how do i delete this post?

scale dail

My Feedback: (8)

We will forgive you. Just this once!

airraptor

My Feedback: (66)

well your plane will not fly at those power settings if they are correct as you described. its only about 1900 watts you need a bigger prop or one with more pitch. now you will not be able to get that plane to fly much over 30 minutes as heavy it is. you need a better plane to fly longer.

scale dail

My Feedback: (8)

So airaptor your going to start giving electric advice on the electric to GlOW forum?[&o] Here we go again!

airraptor

My Feedback: (66)

i dont always but since your so offended by it i will start doing it more often lol this section doesnt have much activity anyway. some of you guys are really rude to guys that make a mistake and cant read the forum correctly. Jeez