Pat Trittles Cessna 310 conversion
#1
Pat Trittles Cessna 310 conversion
I was wondering if any one had thought about, or has converted, Pat Trittles Cessna 310 from electric to glow powered. It looks like a pretty nice kit and, with some beefing up most likely, would make a nice smaller glow model. I'm just wondering what size engines I should use?
Thanks,
Pat
Thanks,
Pat
#2
My Feedback: (24)
RE: Pat Trittles Cessna 310 conversion
I don't have an answer to your question. But on the subject of small C-310's, have a look at the plans available for Rich Uravitch's small electric C-310 that would also make a nice E to G conversion:
http://www.richuravitch.com/rubaseline_003.htm
http://www.richuravitch.com/rubaseline_003.htm
#3
Senior Member
My Feedback: (6)
Join Date: Sep 2005
Location: Castaic,
CA
Posts: 407
Likes: 0
Received 0 Likes
on
0 Posts
RE: Pat Trittles Cessna 310 conversion
Every time Pat comes out with another model (the guy just cranks stuff out!) I think....boy that sure loooks like a nice one to build for glow. The way I see it, his stuff is much like a Guillows or Dumas kit. I would think most of his stuff is right around what you could conceivably put a Thunder Tiger .07 or another .10 in.