ASP 21 conversion
#1
Thread Starter
ASP 21 conversion
Jut found this lurking in a box, It is a series A, ASP. not the latest head reads AJC/JEN 2005 so came from Just Engines UK back then will crank up sometime
hmmmm 3 tries finally a sharp pic martin
should be interesting how it compares to the irvine 20 in a run which did 9200 on ZINGER 10X6
GAME TIME GUESS'S GUYS
hmmmm 3 tries finally a sharp pic martin
should be interesting how it compares to the irvine 20 in a run which did 9200 on ZINGER 10X6
GAME TIME GUESS'S GUYS
#2
Thread Starter
RE: ASP 21 conversion
well took it out to the garage and bolted on the stand mounted the 10x6 zinger too dark to open door tach and run but a few drops down the carb and after about 10 flips off it went
tried this again with a few drops roared off, did this 3 times instant start 1 flip tomorrow am the run martin
tried this again with a few drops roared off, did this 3 times instant start 1 flip tomorrow am the run martin
#6
Thread Starter
RE: ASP 21 conversion
well rerun today DAVIS ABC fuel10x6 wood master air screw9200 wood XOAR 10x5 11200 IDLE IN BOTH 2900-300O no bogs to WOT needle 1 to 1 1/4 open on needle
my guess a apc grey prop 10x6 should give an other 500 on the revs
a little disappointed in the 10x6 revs - good points- quiet, very light grey smoke, very little oil out and light color not black martin
interesting the K and B 20 also did 9200 on the 10x6 wood prop so did the irvine 20 -9200 on the 10x6
Just cranked it up again to try the grey nylon taipan prop that Fiery sent me they have a big rear overhang ( no issue) fairly wide blades 9x6 11000
my guess a apc grey prop 10x6 should give an other 500 on the revs
a little disappointed in the 10x6 revs - good points- quiet, very light grey smoke, very little oil out and light color not black martin
interesting the K and B 20 also did 9200 on the 10x6 wood prop so did the irvine 20 -9200 on the 10x6
Just cranked it up again to try the grey nylon taipan prop that Fiery sent me they have a big rear overhang ( no issue) fairly wide blades 9x6 11000