zalj131

Hi, First time posting the question on this fourm.
Q1. what are the DIP Switch setting for wk-0701 transmitter for G2 Raptor.
Q2. when setting up pitch on wk-0701 transmitter for G2 raptor what is the DIP switch setting is. which ones to off and witch ones to on.
thank you in advance. I Realy need help on this. Reason i posted questions above heli is not lifting off when Throt is in middle.

zalj131

please help for setting pitch for G2 Raptor

yadac123

ON 2,4,6,7 rest are off

It doesn't have to be in the middle. It's the combination between trottle curve and pitch curve.

Thanks
Andy

zalj131

50 % throttle still grounded. when checked the pitch blades turn a little. need more help.
Thanks

yadac123

then adjust dip switch #10 to be safe disconnect your main motor. Adjust the knob and trottle up and see the changes on the pitch. Your pitch slider should move up to make a positive pitch.

Andy

QUICKCINCH

OK HERES HOW U SET YOUR PITCH CURVE WITH WK-0701 TRANS.
TRANS OFF, BATT UNPLUGED
SET FLIGHT MODE TO N
SET V1 DIAL TO 0
TURN DIP SWITCH #10 TO ON, MAKE SURE #11 + #12 ARE OFF
TURN TRANS ON AND PLUG IN BATT
TURN V1 DIAL CLOCK WISE TO 40% START THERE 60%MAX THIS WILL INTRODUCE 40% PITCH @ 50% THROTTLE
TURN DIP SWITCH #10 OFF TO SAVE SETTINGS
TRY THAT LET ME KNOW HOW U MAKE OUT.
QUICKCINCH;

zalj131

My V2 is working as V1. V1 has no response. I do not know what's wrong.

QUICKCINCH

TRY SETTING V2 DIAL TO 0 AS WELL THEN ADJUST V1 TO 40 - 50% TURN DIP SWITCH 10 OFF. IF THAT DOSN'T WORK TRY SETTING V2 TO THE SAME SETTING AS V1, TURN DIP 10 OFF. LET ME KNOW ! QUICKCINCH.