aznboix

hey guys, I'm new to R/C heli world. first time having it and got it as a gift. I flied with it for like 2 seconds and crashed. Now, they main motor's blades spins(sometimes no), but no lifting up. It just keep spinning. Any help? please?

Another thing, on the transimitter, there is a SVID connector, but it doesn't come with any serial or usb cable out of the box. Where can i find the cable to hook up to my computer, so i can use FMS.

Any help?
Thanks.

nitrostaff1

You need to check your pitch on this heli. I guess is that you have broken some parts on the swashplate and up and thus your pitch/collective has changed.

That's not a Svid connector, it's a connector for you to connect the to the computer but you have to get the cable from an oversea dealer since walkera didn't provide us the cable. If you mamage to find a cable the cost for it is about the same if you buy this: http://www.xheli.com/ek2-0905a.html

So I suggest you get the USB one instead because it's has a more clean setup.

Andy

aznboix

so i changed the gear, main motor, the connectors. and still not working. when i turn it on, it calibrates, but then i heard a long noise from the heli. it's a "zzzzz". it keeps "zzzz" untill i unplug the battery. sound like the blades want to move up or down or something like this.

yadac123

when you throttle up and down, goes all 3 servos move up and down when you move the throttle up and down? if yes then your motor might have problems. connect the tail motor into the main motor port on the receiver and try it out. If the tail motor spins then we can conclude that the main motor is bad.

Andy