Eagle 50 Tail Motor
Can someone tell me how to remove the tail motor from the housing. I can't get it through the opening.
|
RE: Eagle 50 Tail Motor
You have to pull the pinion gear to get it off. A puller is the safest way of doing this. Run around 12 us dollars. Happy flying Rick
|
RE: Eagle 50 Tail Motor
Thank you!
|
RE: Eagle 50 Tail Motor
You can cut the spindle off the old motor... and then remove the gear in a vice...
by heating up the gear itself.. I am told this will remove the gear easily. After.. that what I have done is cut a slot with a drill in the tail plastic piece so I can reinstall the next motor with gear without having to take off the gear. Cut the slot in the fattest part of the plastic tail piece away from the holes for mounting the tail motor... works for me just fine. I make the hole bigger towards the boom. |
RE: Eagle 50 Tail Motor
Can I upgrade my tail motor on the eagle 50? Will the brushless main motor be a wise investment?
|
RE: Eagle 50 Tail Motor
eagle 50 is too small of a heli to use brushless motor. It's like putting an AMG engine on a KIA. The brush motor itself does provide plenty of power.
Andy |
RE: Eagle 50 Tail Motor
You know I don't think it is a matter of power but one of reliability. I waiting for my third main and tail motors. Granted I kind of abused the original motor in an unfortunate accident involving the 3D switch but the second motor did not last for more than about eight batteries. If you check the spare parts pages from xheli.com or exceedrc.com both offer a brushless motor upgrade. I been checking for weeks and they are always out of stock. I am planning on upgrading mine just for the reliability aspect. I think I have found a motor and ESC set that will work and I can get them for under $40 dollars. If the tail motor continues to be a problem I probably upgrade to a belt drive heli. I like the eagle 50 but I would rather be flying than waiting. This is my first heli and I am just getting to where I can hover. Wound up missing a couple of great flying opportunities last weekend due to these issues.
|
RE: Eagle 50 Tail Motor
As it turned out, it wasn't the main motor but the receiver throttle function. It is being replaced under warranty by XHELI.com.
|
All times are GMT -8. The time now is 09:37 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.