RCU Forums - zero throttle but blades are still spinning...

RCU Forums (https://www.rcuniverse.com/forum/)

- Exceed RC Support - Helicopter (https://www.rcuniverse.com/forum/exceed-rc-support-helicopter-473/)

- - zero throttle but blades are still spinning... (https://www.rcuniverse.com/forum/exceed-rc-support-helicopter-473/7302100-zero-throttle-but-blades-still-spinning.html)

rftusa2008

03-29-2008 04:21 PM

zero throttle but blades are still spinning...

Trim #2 is way down already. Turning trim # 2 up will increas the speed at zero throttle. Can anyone let me know what's wrong. On the transmitter that came with the heli, the throttle zero setting is resting between 1st and 2nd notch level. It cannot go down any further. Thanks for any help.

yadac123

04-02-2008 05:44 PM

RE: zero throttle but blades are still spinning...

sorry I don't understand your question. what's your heli?

Andy

charlie61

01-23-2013 09:51 AM

RE: zero throttle but blades are still spinning...

same issue falcon40v2 2.4 . as soon as i plug the battery in main blade starts spinning. tx iis set to zero throttle. yes i did have a crash an snaped a main blade. should i change the motor(esc is mounted on the motor) or would it be in my receiver. thanks

All times are GMT -8. The time now is 11:30 PM.