change to lipo
I have a Double Horse no 9086 heli and want change to lipo. Is this possible and what voltage battery should I use 11.1 or 7.4 volt. The battery it has is a 9.4 nicad. Thanks Joe
|
RE: change to lipo
it will work but I don't recommend it so use at your own risk. Yes a 7.4v lipo will work but the RX doesn't support lipo protection and it will run the battery dry. We all know that a lipo can not be run dry and it must not fall below 6.0V for 2 cell lipo. You can use it as long as you time yourself and don't like it run for more than 6 to 8 minutes and you should be fine.
Andy |
All times are GMT -8. The time now is 06:58 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.