Engine & Pipe for Outlaw delta ARF?
05-12-2011, 05:15 PM
#52
RE: Engine & Pipe for Outlaw delta ARF?
ORIGINAL: airraptor
Sorry duck this is what i based it off of. I just saw were you said power yours with stock muffler and will turn an 8x8 at 18,000 easily.
Sorry duck this is what i based it off of. I just saw were you said power yours with stock muffler and will turn an 8x8 at 18,000 easily.
05-12-2011, 06:09 PM
#53
Senior Member
Thread Starter
Join Date: May 2006
Location: Newnan,
GA
Posts: 322
Likes: 0
Received 0 Likes
on
0 Posts
RE: Engine & Pipe for Outlaw delta ARF?
ORIGINAL: combatpigg
I would like to try one of these planes. This plane has performed well enough to be mass marketed and I haven't heard of a delta that out performs it aerobatically.
I would like to try one of these planes. This plane has performed well enough to be mass marketed and I haven't heard of a delta that out performs it aerobatically.
Hey Combat...I thought you had one??
07-18-2011, 04:59 PM
#54
Senior Member
Join Date: Dec 2008
Location: , CA
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
RE: Engine & Pipe for Outlaw delta ARF?
I just got one of these, quick build!
Put a Jett 35 in it with a 9 X 6 APC, Eagltree said 137 mph on maiden flight, break-in fuel and needle setting.
A fun bird to fly! A bit hariy on the launch, but got it up and down okay.
Put a Jett 35 in it with a 9 X 6 APC, Eagltree said 137 mph on maiden flight, break-in fuel and needle setting.
A fun bird to fly! A bit hariy on the launch, but got it up and down okay.
