Fuel engineering
03-13-2007, 01:33 AM
#1
Member
Thread Starter
Join Date: Nov 2006
Location: CanberraACT, AUSTRALIA
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Fuel engineering
http://www.lubedev.com/smartgas/funny.htm
If you find your normal nitro methane fuels rather boring , why not try some additives.
I personally do not recommend doing this with an expensive engine, but it could be fun to get a few models with cheap robust engines and then see who can get the best power by fuel engineering.
WARNING You will probably ruin the engine if you are not careful.
If you find your normal nitro methane fuels rather boring , why not try some additives.
I personally do not recommend doing this with an expensive engine, but it could be fun to get a few models with cheap robust engines and then see who can get the best power by fuel engineering.
WARNING You will probably ruin the engine if you are not careful.
03-15-2007, 10:21 PM
#2
Member
Join Date: Nov 2006
Location: McClellanville, SC
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
RE: Fuel engineering
Okay an OS 46 FX on kerosine 60% ether 40% with butane or propane boost. O AMA wont like that! What nitriuos oxside what? Just kidding I am all ears about exotic fuels.
