Introducing the "Can't We All get Along" Extreme Speed Prop Plane!
03-07-2008, 03:13 PM
#5
Senior Member
My Feedback: (14)
Join Date: May 2005
Location: GRIFTON,
NC
Posts: 488
Likes: 0
Received 0 Likes
on
0 Posts
RE: Introducing the "Can't We All get Along" Extreme Speed Prop Plane!
K-MOT,
That is a backward projected negative!
"Glo" go's in the front so "The Goo" can trickle down the fuselage and gum the "Electric Commutater"!
See the photo for enhanced understanding
]
The guy operating the forklift fly's "Leeky's"[X(]
HE HE HE
That is a backward projected negative!
"Glo" go's in the front so "The Goo" can trickle down the fuselage and gum the "Electric Commutater"!
See the photo for enhanced understanding![
]The guy operating the forklift fly's "Leeky's"[X(]
HE HE HE
03-07-2008, 04:37 PM
#6
RE: Introducing the "Can't We All get Along" Extreme Speed Prop Plane!
CP: Thanks for the compliment! It's a Photo-Chop and I didn't think it would fool anyone! 
SJ: There is a version also that has the glow engine in front so that the expelled goo can keep the bearings lubed in the 80000 rpm lekky motors.
SJ: There is a version also that has the glow engine in front so that the expelled goo can keep the bearings lubed in the 80000 rpm lekky motors.
03-08-2008, 01:10 AM
#8
Join Date: Jul 2004
Location: Middleboro, MA
Posts: 3,275
Likes: 0
Received 0 Likes
on
0 Posts
RE: Introducing the "Can't We All get Along" Extreme Speed Prop Plane!
ORIGINAL: Kmot
SJ: There is a version also that has the glow engine in front so that the expelled goo can keep the bearings lubed in the 80000 rpm lekky motors.
SJ: There is a version also that has the glow engine in front so that the expelled goo can keep the bearings lubed in the 80000 rpm lekky motors.
Brushless don't got no
"Electric Commutater"
Slows them down too much!!!
03-08-2008, 02:37 AM
#9
RE: Introducing the "Can't We All get Along" Extreme Speed Prop Plane!
What if this plane were to actually be built? And here is the interesting scenario:
The electric motor and folding prop would be used to get the plane airborne and gain altitude. The glow engine would be fitted with some sort of ridiculous pitch prop, like a 10x20. While climbing, the glow engine would be laboring becuase of the prop and would not be able to step up on the pipe. Once the model was at altitude, it would be put into a dive. The glow engine would gain rpm and finally get up on the pipe. The electric motor would be shut off and the prop would fold to reduce drag. The glow engine would come up to full song ripping and shredding the air with that crazy 20P prop and the SPEED GODS would be smiling.[sm=thumbup.gif]
The electric motor and folding prop would be used to get the plane airborne and gain altitude. The glow engine would be fitted with some sort of ridiculous pitch prop, like a 10x20. While climbing, the glow engine would be laboring becuase of the prop and would not be able to step up on the pipe. Once the model was at altitude, it would be put into a dive. The glow engine would gain rpm and finally get up on the pipe. The electric motor would be shut off and the prop would fold to reduce drag. The glow engine would come up to full song ripping and shredding the air with that crazy 20P prop and the SPEED GODS would be smiling.
[sm=thumbup.gif]
03-08-2008, 10:58 AM
#12
RE: Introducing the "Can't We All get Along" Extreme Speed Prop Plane!
Kmot, that is a great idea. You could experiment with ridiculous props on the glow motor that normally wouldn't launch the plane. The electric motor could help the glow motor to get the big 7x12 prop "off its' chest".
