Patriot 40
01-22-2011, 09:02 AM
#1
Thread Starter
My Feedback: (15)
Join Date: Jul 2005
Location: CourticeOntario, CANADA
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Patriot 40
Would someone be able to trace me the root and tip ribs for this wing? I am going to cut some foam wings.
I have ordered a set of plans from G. Planes but will not get them for about 3 weeks.
I would also require the wing platform like the sweep and distance from root to tip rib so i can get going on this.
I plan on building two of them, one with a LS Nelson 500 and the other with a Jett or YS. We'll see as this project goes on.
Thanks for the help in advance, really appreciate it.
Phil
.
I have ordered a set of plans from G. Planes but will not get them for about 3 weeks.
I would also require the wing platform like the sweep and distance from root to tip rib so i can get going on this.
I plan on building two of them, one with a LS Nelson 500 and the other with a Jett or YS. We'll see as this project goes on.
Thanks for the help in advance, really appreciate it.
Phil
.
