Who makes a strong .15 rear exhaust and is there a tuned pipe that will fit it?
#3
Senior Member
Thread Starter
My Feedback: (2)
Join Date: May 2003
Location: Lexington,
KY
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
Who makes a strong .15 rear exhaust and is there a tuned pipe that will fit it?
Thanks, do you know if Cox still makes the conquest? If not, are parts still available and which would you go with, the MVVS 15 or the conquest?
Thanks,
Bijan
Thanks,
Bijan
#4
Senior Member
Join Date: Mar 2002
Location: sydney, AUSTRALIA
Posts: 309
Likes: 0
Received 0 Likes
on
0 Posts
Hot 15's
The Conquest is still made, by Mecoa these days, however might not be in stock.
The MVVS 15's are probably the best bang for the buck. If you look hard, you might find the MVVS 15 as a rear intake, rear exhaust version. You will have to use some ingenuity to adapt a R/C carburettor to it. I used an Enya unit.
Another alternative is the Uctkam 2,5 which is sometimes marketed as the MDS 15 Pylon. An MVVS 15 carburetor fits perfectly. Incedentally, this engine is supplied with a matching pipe.
The MVVS 15's are probably the best bang for the buck. If you look hard, you might find the MVVS 15 as a rear intake, rear exhaust version. You will have to use some ingenuity to adapt a R/C carburettor to it. I used an Enya unit.
Another alternative is the Uctkam 2,5 which is sometimes marketed as the MDS 15 Pylon. An MVVS 15 carburetor fits perfectly. Incedentally, this engine is supplied with a matching pipe.
#5
Senior Member
My Feedback: (1)
Join Date: Mar 2002
Location: Portland, OR
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
Who makes a strong .15 rear exhaust and is there a tuned pipe that will fit it?
Do you have an event rule that limits you to a .15? If not, why not a Norvel Big Mig .25? Inexpensive, light and powerful, so the combat guys say. What is the plane?
#7
Junior Member
Join Date: Jul 2002
Location: Norristown,
PA
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
hold on
If you want a real good .15 rear exhaust motor, go with a NovaRossi motor, they have the highest RPM and HP ratings. These are great speed motors and love to be run lean and mean. You can also get a pipe from them or Macs, buit their pipes are tuned for their motor. These are definately better than a Cox motor who has the most unreliable motors out, their best motor is the .020 and it is useless. Get a NovaRossi and break it in and have it tuned right and it will run strong for many seasons. If you find a better motor than the NovaRossi then my whole brain will explode inside my head and the remains will ooze out of my nose, thats how confident i am with the speed and power of the NovaRossi motors.
Happy Landings
JrAce2605
Valley Forge Signal Seekers
Happy Landings
JrAce2605
Valley Forge Signal Seekers
#9
Member
My Feedback: (1)
Join Date: Feb 2003
Location: Zagreb, CROATIA (HRVATSKA)
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Who makes a strong .15 rear exhaust and is there a tuned pipe that will fit it?
Hello,
Here is one other .15 engine, Blue Star 15 Combat.
It is distributed by Jamara, and they claim that it is very powerfull.
Does anyone already tried it and have any experience with it ?
Also, is it possible to run the Novarossi engines without tuned pipe or
silencer at all ?
I would like to use it on Graupner Race Rat model, but there is
little hard to install tuned pipe to that model.
The noise is no problem for me.
I removed the silencer from the OS 15 and it runs ok ( I also
noticed slightly more power increase).
Anyone tried this with Novarossi, especially with the FX 15 Aero ?
Does somebody have the experience with this Novarossi engine ?
Best regards,
Kristijan Kljucaric
Here is one other .15 engine, Blue Star 15 Combat.
It is distributed by Jamara, and they claim that it is very powerfull.
Does anyone already tried it and have any experience with it ?
Also, is it possible to run the Novarossi engines without tuned pipe or
silencer at all ?
I would like to use it on Graupner Race Rat model, but there is
little hard to install tuned pipe to that model.
The noise is no problem for me.
I removed the silencer from the OS 15 and it runs ok ( I also
noticed slightly more power increase).
Anyone tried this with Novarossi, especially with the FX 15 Aero ?
Does somebody have the experience with this Novarossi engine ?
Best regards,
Kristijan Kljucaric