DIAMOND DUST PLAN
10-01-2009, 10:06 AM
#1
Member
Thread Starter
Join Date: Oct 2008
Location: buenos aires, ARGENTINA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
DIAMOND DUST PLAN
HELLO PEOPLE, ANYBODY HAVE A DIAMOND DUST PLAN OR SAY TO ME WHERE I CAN FIND IT?, I HAVE A DIAMOND DUST MADE OF FOAM RECOVERD BY BALSA WOOD SO IS HEAVY AND I WOULD LIKE TO BUILT ANOTHER LIKE THE ORIGINAL (CARDON FIBER AND WOOD, RECOVERED WITH MONOKOTE).
I LIVE IN ARGENTINA (SOUTH AMERICA) AND DIAMOND DUST RC WILL NOT SHIP THE KIT TO MY COUNTRY.
REGARDS.
GABRIEL.
I LIVE IN ARGENTINA (SOUTH AMERICA) AND DIAMOND DUST RC WILL NOT SHIP THE KIT TO MY COUNTRY.
REGARDS.
GABRIEL.
10-01-2009, 10:13 AM
#2
Senior Member
My Feedback: (5)
Join Date: Jan 2002
Location: Tulsa, OK
Posts: 2,025
Likes: 0
Received 0 Likes
on
0 Posts
RE: DIAMOND DUST PLAN
See if www.mikesrc.us will ship you a delta kit. Similar to a Dust.
I have some Dust plans but shipping without folding would probably not be cheap.
I have some Dust plans but shipping without folding would probably not be cheap.
10-01-2009, 10:25 AM
#3
Member
Thread Starter
Join Date: Oct 2008
Location: buenos aires, ARGENTINA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
RE: DIAMOND DUST PLAN
Dear Mike
Could you send me by e- mail the plan ( jpg or dwg format)? or only a cratch with a wing root an, winng tip profile, lenght, wingspan, CG location?
Also you can take a picture of a plan with your camera an sent it to my e mail, please.
Thanks.
Gabriel.
Could you send me by e- mail the plan ( jpg or dwg format)? or only a cratch with a wing root an, winng tip profile, lenght, wingspan, CG location?
Also you can take a picture of a plan with your camera an sent it to my e mail, please.
Thanks.
Gabriel.
10-02-2009, 06:01 AM
#5
Member
Thread Starter
Join Date: Oct 2008
Location: buenos aires, ARGENTINA
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
RE: DIAMOND DUST PLAN
Dear Mike
Thank you for the picture, It is useful for me. Only I need the Thickness of the wing profile at the widest point. You send me the lenght, but also I need the thickness for starting to built this amazing model.
Regards.
Gabriel.
Thank you for the picture, It is useful for me. Only I need the Thickness of the wing profile at the widest point. You send me the lenght, but also I need the thickness for starting to built this amazing model.
Regards.
Gabriel.
10-02-2009, 05:56 PM
#6
Member
Join Date: Aug 2006
Location: south lyon,
MI
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
RE: DIAMOND DUST PLAN
Ive had three diamond dust deltas.and you should go with the screamin demon.and there are ways to make it super clean and faster.like the one on the website.
10-02-2009, 06:46 PM
#7
Senior Member
My Feedback: (5)
Join Date: Jan 2002
Location: Tulsa, OK
Posts: 2,025
Likes: 0
Received 0 Likes
on
0 Posts
RE: DIAMOND DUST PLAN
The main inner rib is 1.75" at the thickest point.
the second rib is .75" at the thickest point.
the outer rib is 5/16".
Hope that helps.
the second rib is .75" at the thickest point.
the outer rib is 5/16".
Hope that helps.
