|
have engine, need plane
1 Attachment(s)
I just picked this little engine up at a swap meet and it looks like it might be a good candidate for a go fast plane. It's a K&B 3.5 rear exhaust w/tuned pipe. It came with a perry carb and also the one in the pic. I was thinking of a diamond dust, but it may be too small. are there any speed planes that will accomodate a rear exhaust other than a delta wing?
|
RE: have engine, need plane
acam
Nice little engine. One of my all time favorites is a 35 sport jett engine that just keeps on ticking now going into its fifth season. Turns 19.6k and idles as well ans anything. Ok, lets first find out what you got here. Get her on a stand with a tack and see what you have got. If it does not turn at least 17k with a 9-6, its a good fishing weight IMHO. That being said, there is a local hopped up K & B screamer 48 that turns around 19k by ear, and is is outrunning my sports jett 50L. Owner will not let me near it with a tack!!! Some are junk, some are outstanding is what I am trying to say in a round about way. If it turns around 16k, pop it on a 25 size shrike, add a 25 size apc pylon prop, and it will scoot just fine and be a blast to fly and show off to the guys. ENJOY |
RE: have engine, need plane
Thanks for the input. It only cost me $50. I figured it will get at least that much on E-Bay if I don't use it. From what I've read, this is an outboard boat motor or can be converted to a ducted fan. I will put it on a tach and see what it turns with the venturi and also the perry carb. It needs a bladder fuel tank though.
|
RE: have engine, need plane
Sig Doubler II is a good little plane for your engine.
Good flying 1/4 midget racer. There not produced these days but you can sometimes find them on Ebay. Mike |
RE: have engine, need plane
1 Attachment(s)
Wow rear exhaust planes, where can I start? Back in the 80s. Rear exhaust engines dominated the F3A contest. Planes like the Deception, Magic, Curare, Blue Angel, the list goes on and on.
These were sweet looking planes that were designed to handle well and just go fr*%kn fast! These planes were mainly 60 size, but there are 20 and 40 sizes as well. Look into the classic pattern forums. Really sick stuff there. Here's the business end of a MK Skymaster 20, OS rear exhaust with a Hatori header and retractable nose wheel. Remember this is a "20" size plane! DM ORIGINAL: acam37 I just picked this little engine up at a swap meet and it looks like it might be a good candidate for a go fast plane. It's a K&B 3.5 rear exhaust w/tuned pipe. It came with a perry carb and also the one in the pic. I was thinking of a diamond dust, but it may be too small. are there any speed planes that will accomodate a rear exhaust other than a delta wing? |
RE: have engine, need plane
OH MY GOD!! [X(]
Sorry guys. I have no Idea why this pix came out this big! I used them on a build thread and they were fine. Sorry about that. [:o] DM |
RE: have engine, need plane
ORIGINAL: vintageflyer OH MY GOD!! [X(] Sorry guys. I have no Idea why this pix came out this big! I used them on a build thread and they were fine. Sorry about that. [:o] DM That's OK. I didn't get the fine detail on your Skymaster thread, but it came though nicely in this one...:D Mark |
RE: have engine, need plane
The K&B 3.5 was a fun little engine - and perhaps the most powerful .21 size engine back in its day. Lots were flown for sport use, FF, CL, and it found a real nitch in the Kress ducted fan applications. Also became very well known as a car engine. And as noted, this was also the engine that was used in the .21 outboard. You could run it with a pipe, and K&B offered a bolt-on can muffler for it with dual outlets - was kinda funky looking, and it worked well. I believe the original aero version did indeed come with a Perry carb.
I went looking on the MECOA web site, and oddly enough, they do not have much of any documentation for the original 3.5 aero version. In any case ...... the engine runs well. Put it on the bench for a while, get use to how it runs, and try a few props. Id suggest starting with an 8x6 and working around from there. |
RE: have engine, need plane
ORIGINAL: acam37 I just picked this little engine up at a swap meet and it looks like it might be a good candidate for a go fast plane. It's a K&B 3.5 rear exhaust w/tuned pipe. It came with a perry carb and also the one in the pic. I was thinking of a diamond dust, but it may be too small. are there any speed planes that will accomodate a rear exhaust other than a delta wing? http://www.ulmer-rc.com/dotnetnuke/D...aspx?tabid=102 Mark |
RE: have engine, need plane
ORIGINAL: rmenke acam Nice little engine. One of my all time favorites is a 35 sport jett engine that just keeps on ticking now going into its fifth season. Turns 19.6k and idles as well ans anything. Ok, lets first find out what you got here. Get her on a stand with a tack and see what you have got. If it does not turn at least 17k with a 9-6, its a good fishing weight IMHO. |
RE: have engine, need plane
ORIGINAL: bob27s The K&B 3.5 was a fun little engine - and perhaps the most powerful .21 size engine back in its day. Lots were flown for sport use, FF, CL, and it found a real nitch in the Kress ducted fan applications. Also became very well known as a car engine. And as noted, this was also the engine that was used in the .21 outboard. You could run it with a pipe, and K&B offered a bolt-on can muffler for it with dual outlets - was kinda funky looking, and it worked well. I believe the original aero version did indeed come with a Perry carb. I went looking on the MECOA web site, and oddly enough, they do not have much of any documentation for the original 3.5 aero version. In any case ...... the engine runs well. Put it on the bench for a while, get use to how it runs, and try a few props. Id suggest starting with an 8x6 and working around from there. :D |
RE: have engine, need plane
ORIGINAL: MJD 17k on a .21 with a 9-6.....? I didn't know these could do that. kc |
RE: have engine, need plane
A Nelson 40 Q40 racing engine wouldn't turn that size prop those rpm's.
I doubt a .21 would either. |
RE: have engine, need plane
ORIGINAL: KC36330 a member of our club has a diamond dust with a .21 Rossi w/ short pipe and it turns a 7.5x9 @ 28K when it stages on the pipe. it's an instantaneous jump from 15K to 25K and then as the pipe warms it gains the other 3K, it's as much fun to stick the tach on it as it is to fly it. the 21 doesn't have the best authority for hand launching (it drops about 4' when launched before lifting) but it moves once on step in the air. kc JFYI The actual Novarossi .21 LS, used (both stock and highly modified) for the annual Speed Cup contest with purpose built speed planes, turns hand made 5x6 to 5.5x6 carbon props at about 27000 statically and about 32000 rpm unloaded. Fastest speed so far recorded was about 180 mph through a FAI conform speed trap (averaged speed of course). There still seems to be more speed potential... |
RE: have engine, need plane
I see some of you guys are interested in how many RPM's this engine will turn. As soon as I get back from my spring break vacation I will put it on the test stand and see just what it will do. I have never done a bladder fuel tank before so I need to get the stuff together to make one. A combat guy at our field said he will help me. I do have a good selection of different size speed props to try out. I will post the results.
|
RE: have engine, need plane
ORIGINAL: Razor-RCU Bob is an Encyclopedia of engine knowledge. Bob- Do you have a K&B 7.5CC fire layin around? :D |
RE: have engine, need plane
Bob...did you see the K&B .21 question in the glow engines forum?
There's a guy asking about wrist pin orientation...I told him that if it's like the 6.5 and 7.5 the teflon wear button goes toward the front...180* away from the exh. port...that is correct, isn't it? (I have 6.5's and a 7.5 but no 3.5's) |
RE: have engine, need plane
ORIGINAL: rmenke acam Nice little engine. One of my all time favorites is a 35 sport jett engine that just keeps on ticking now going into its fifth season. Turns 19.6k and idles as well ans anything. Ok, lets first find out what you got here. Get her on a stand with a tack and see what you have got. If it does not turn at least 17k with a 9-6, its a good fishing weight IMHO. That being said, there is a local hopped up K & B screamer 48 that turns around 19k by ear, and is is outrunning my sports jett 50L. Owner will not let me near it with a tack!!! Some are junk, some are outstanding is what I am trying to say in a round about way. If it turns around 16k, pop it on a 25 size shrike, add a 25 size apc pylon prop, and it will scoot just fine and be a blast to fly and show off to the guys. ENJOY Kevin |
RE: have engine, need plane
ORIGINAL: rmenke acam Nice little engine. One of my all time favorites is a 35 sport jett engine that just keeps on ticking now going into its fifth season. Turns 19.6k and idles as well ans anything. Ok, lets first find out what you got here. Get her on a stand with a tack and see what you have got. If it does not turn at least 17k with a 9-6, its a good fishing weight IMHO. That being said, there is a local hopped up K & B screamer 48 that turns around 19k by ear, and is is outrunning my sports jett 50L. Owner will not let me near it with a tack!!! Some are junk, some are outstanding is what I am trying to say in a round about way. If it turns around 16k, pop it on a 25 size shrike, add a 25 size apc pylon prop, and it will scoot just fine and be a blast to fly and show off to the guys. ENJOY Kevin |
RE: have engine, need plane
ORIGINAL: SSGSPEEDMAN Hi I had a question on the K7B .48. What prop is that guy using to out run the Jett.50? Kevin |
RE: have engine, need plane
ORIGINAL: proptop Bob...did you see the K&B .21 question in the glow engines forum? There's a guy asking about wrist pin orientation...I told him that if it's like the 6.5 and 7.5 the teflon wear button goes toward the front...180* away from the exh. port...that is correct, isn't it? (I have 6.5's and a 7.5 but no 3.5's) What locks in the aft side ? a clip? or a step ? |
RE: have engine, need plane
ORIGINAL: MJD ORIGINAL: SSGSPEEDMAN Hi I had a question on the K7B .48. What prop is that guy using to out run the Jett.50? Kevin Kevin |
RE: have engine, need plane
Bob...the piston has a blind hole for the pin, and both the I. and E. ports have a bridge, so theoretically the pad could rub on either one, but all my 6.5's and the 7.5 have the pin facing the dual bridged I ports...and that's what I told him...
He was talking about lubrication, and other things...but I don't think it faces the E. port. Here's the thread: http://www.rcuniverse.com/forum/m_5543699/tm.htm |
RE: have engine, need plane
1 Attachment(s)
I think I found a plane for my motor. This is a scratch built mini-DD. Wingspan 28", chord 17". AUW w/fuel is 1lb. 15oz. I am starting with a 7X6 prop and NORVEL 25% nitro/18% oil fuel. I may have a problem with foaming. The tank is only 2 oz. This is all I could squeeze into the plane w/out foam around the tank. This will give me about 3 min. of full throttle runs. I will maiden it today, and one of two things will happen. It's either going to be real fast or make a spectacular crash. If this one does not fly well, I still have an original DD framed up and ready to cover. Then I will Have plane, Need engine.
|
RE: have engine, need plane
Looks good![8D] Bet it'll fly real nice...let us know how it turns out, aye!?:D
|
| All times are GMT -8. The time now is 08:26 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.