coloradoz

My Feedback: (38)

Hello All, I came in possession of a Hippo Tipo today at a garage sale - I couldn't believe my eyes. Now for the request for help. I'm needing some information and drawings to help me get this bird in the air, specifically.

1. Firewall template
2. CG
3. Target flying weight
4. Any templates for the elevator and rudder - it was missing these. Probably not critical.

Thanks all!
..AJ

pitstop000

My Feedback: (26)

Hi AJ,

post some pictures when you get a chance.

I think I can help.

coloradoz

My Feedback: (38)

Hello Pitstop - Thanks, I'll post some pics - not much to see there, but an ugly half baked job on the Hippo - The wing and stab are sheeted and glassed (the paint job stinks - but I can fix that). The info that I'm needing would come from the documentation for the plane. To add to the list, I'm also needing mounting technique, dimensions, and positions for the wing mounts.

Thanks again for your help

pitstop000

My Feedback: (26)

coloradoz

My Feedback: (38)

Thanks for the info Paul - That stuff is useful! Any luck getting the templates too? On the ailerons/rudder and elevator - I only have the ailerons installed - the rest is missing. Also, it looks like the rudder had a fairing - so I'll have to fabricate that (or leave it out and go with a full rudder all the way to the top.

Thanks again.
..AJ

pitstop000

My Feedback: (26)

pitstop000

My Feedback: (26)

coloradoz

My Feedback: (38)

Paul, these are perfect for me! Many-many thanks - this is plenty fine to get me going on the tail feathers for sure! On your pics of the firewall - are they 2-piece or is that an optical illusion?

thanks again!
..AJ

pitstop000

My Feedback: (26)

pitstop000

My Feedback: (26)

coloradoz

My Feedback: (38)

Well, of course, planning on a complete outfitting. I was thinking of a YS91 for the power w/pipe + spring air on the retracts. I'll mount sideways with the pipe running the the pipe tunnel (like (I've done my my other Tipo - see my pics in my gallery). I've had the 91 sitting around for a while without a good home - this seems like a good home to me. Right now the airframe weighs all of around 3 pounds. So, I think the the 91 and all up it should come in at around 8 pounds or so. My 61 powered Tipo w/pipe - tips the scale at 8 lb/14 oz.

pitstop000

My Feedback: (26)

coloradoz

My Feedback: (38)

Try this

http://www.rcuniverse.com/community/...ls&memid=15221

pitstop000

My Feedback: (26)

coloradoz

My Feedback: (38)

I truly appreciate your help Paul! Believe it or not - this plane will complete my Tipo collection (MK and Great planes versions flying). I have the WK Hobbies, MK, Great Planes and now the Hippo Tipo versions.

..AJ

pitstop000

My Feedback: (26)

coloradoz

My Feedback: (38)

Hello Paul - how are you coming on the firewall template?
..AJ

pitstop000

My Feedback: (26)

AJ

I was just waiting on you.
I figured you were just going to use a contour gauge on the fuse to get the bulkhead, since the location might be in a different position for your intended motor.
I can definitely see that you’re a true builder. I'll send you the last template that I have, but not proofed.

coloradoz

My Feedback: (38)

Thanks Paul, I"d appreciate that - I can probably deal with proofing issues - I suppose the other key thing would be the location of the firewall from the nose ring. Do you have any docs on that?

..AJ

pitstop000

My Feedback: (26)

AJ, check that PDF again, just about everything is there that you’ll need.

Very first page, firewall is 4 ¼ from nose.
Actual motor cutout is also there.

Your making me work here now.
I actually have this plane.

coloradoz

My Feedback: (38)

Ok, I see it now.

Ace913

My Feedback: (104)

Hi Guys,

I acquired a pristine Hanson Tipo 825 kit some time ago. It's missing the build instructions (other than 2 hand written sheets). Any idea where I can find some? Also, what's a good engine for this bird? I have a Hanno Special which is a monster but I was thinking it might be a little small for this - any thoughts?


Thanks,

Jeff

coloradoz

My Feedback: (38)

Believe it or not, that plane will come out weighing less than the 60 size Tipo (at least in my case) - Depending on where you live, the Hanno should handle it. You can always put a BX 1.08 in it with a johnson side to rear adapter - that's what the throttle is for. I'm putting a YS91 in mine.

Look at the top of this post, Paul was kind enough to post some build instructions there. The only real critical thing that you'll need is the firewall template - I'm still working on mine, I've got a cardboard template now - and hopefully will get one that I can install soon.

Ace913

My Feedback: (104)

Hello Again,

Here is what I have for build info.

Jeff

coloradoz

My Feedback: (38)

Well, that is basically the same info that I've got. The only thing missing are the templates. Pretty easy to make up though.