Charger/Charge Lead Question
#1
Thread Starter
My Feedback: (1)
Join Date: Sep 2004
Location: Glastonbury CT
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Charger/Charge Lead Question
Hello All,
My batteries for my old Great Planes RCUbipe foamy have died. I'm looking to replace them with this:
http://www3.towerhobbies.com/cgi-bin...2&I=LXNYH9&P=K
Which I believe is the newer version, however the balance connector is different from the simple two pin connector that my old batteries had. If I were trying to charge with a Great Planes Triton JR charger (http://www3.towerhobbies.com/cgi-bin...2&I=LXMAH9&P=K), what leads/balance board would I need to get up and running?
I'm a little confused by all the leads/connector types I have found...any help is appreciated.
Thanks a ton
My batteries for my old Great Planes RCUbipe foamy have died. I'm looking to replace them with this:
http://www3.towerhobbies.com/cgi-bin...2&I=LXNYH9&P=K
Which I believe is the newer version, however the balance connector is different from the simple two pin connector that my old batteries had. If I were trying to charge with a Great Planes Triton JR charger (http://www3.towerhobbies.com/cgi-bin...2&I=LXMAH9&P=K), what leads/balance board would I need to get up and running?
I'm a little confused by all the leads/connector types I have found...any help is appreciated.
Thanks a ton
#2
Senior Member
My Feedback: (325)
Join Date: Mar 2003
Location: LaGrange, OH
Posts: 14,857
Likes: 0
Received 0 Likes
on
0 Posts
RE: Charger/Charge Lead Question
The Triton JR has no provision for balancing , but any balancer or charger with balance capability with XH taps would work. The pack uses XH , sometimes called align.
#3
Thread Starter
My Feedback: (1)
Join Date: Sep 2004
Location: Glastonbury CT
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
RE: Charger/Charge Lead Question
Do banana to XH harnesses exist? I'm having some trouble finding them and it seems most chargers just have banana plug ports on their outlet terminals..
#5
Senior Member
Join Date: Sep 2009
Location: Aston,
PA
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
RE: Charger/Charge Lead Question
Hey CJ, give Paul a call at http://rclipos.com/. He's got everything electric.
#6
My Feedback: (282)
Join Date: Dec 2001
Location: Tampa, FL
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
RE: Charger/Charge Lead Question
ORIGINAL: CJKling
Hello All,
My batteries for my old Great Planes RCUbipe foamy have died. I'm looking to replace them with this:
http://www3.towerhobbies.com/cgi-bin...2&I=LXNYH9&P=K
Which I believe is the newer version, however the balance connector is different from the simple two pin connector that my old batteries had. If I were trying to charge with a Great Planes Triton JR charger (http://www3.towerhobbies.com/cgi-bin...2&I=LXMAH9&P=K), what leads/balance board would I need to get up and running?
I'm a little confused by all the leads/connector types I have found...any help is appreciated.
Thanks a ton
Hello All,
My batteries for my old Great Planes RCUbipe foamy have died. I'm looking to replace them with this:
http://www3.towerhobbies.com/cgi-bin...2&I=LXNYH9&P=K
Which I believe is the newer version, however the balance connector is different from the simple two pin connector that my old batteries had. If I were trying to charge with a Great Planes Triton JR charger (http://www3.towerhobbies.com/cgi-bin...2&I=LXMAH9&P=K), what leads/balance board would I need to get up and running?
I'm a little confused by all the leads/connector types I have found...any help is appreciated.
Thanks a ton
http://www.rcaccessory.com/txchargematechargecable.aspx
This has banana plugs on the charger end, although not shown in the picture.