Wire length from controllers
#1
Member
Thread Starter
Wire length from controllers
I'm building a 4 motor plane. I know now that the wires from the battery to the controller must be short. Can I use 28" to 30" wires from the controller to the outboard motors? Inboard motors will have 18" to 19" wires. If not, what are my alternatives?
Thanks
Thanks
#2
My Feedback: (9)
Join Date: Jul 2002
Location: St. Charles, IL
Posts: 1,867
Likes: 0
Received 0 Likes
on
0 Posts
RE: Wire length from controllers
Astro Bob (of Astroflight fame) tells of setting up a blimp with something like 15' wires from the controllers to the motors. It's the battery to controller length that's a problem.
Walt
Walt
#3
RE: Wire length from controllers
Then you can always incease a wire size if they are really long i.e. 12 ga to 10 ga but you do not have long leads so I would not worry about it.