C-ARF Ultra Flash build Thread + Video
#253
Senior Member
Join Date: Aug 2006
Location: -Burgundy, FRANCE
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
RE: C-ARF Ultra Flash build Thread + Video
ORIGINAL: ricardinho
hello any ideas on pilot sizes for this plane. i was thinking something funny not scale... thanks pat
hello any ideas on pilot sizes for this plane. i was thinking something funny not scale... thanks pat
Mickey Mouse is the fastest funny pilot for the Flash !
Alain
#255
RE: C-ARF Ultra Flash build Thread + Video
The axle bolts that came with my C-36/2 Behotec retracts are about 1/4" too long in the smooth axle part, such that the 1/4" threads (not 6mm unfortunately) bottom out in the strut before the head on the axle bolt comes up against the wheel rim. End result is that the wheel rim is 1/4" away from seating up against the brake assembly - ususable. Ray Lobonte (Comp-ARF rep) is trying to get the correct axles, but I will soon run out of time to be ready for the Speedworld/Desert Storm fly-in in Phoenix 11-13 February.
So, the question is, does anybody know if an airframe bolt with the correct 13/16" grip length (smooth, unthreaded part of the bolt) would be okay to substitute for an axle? I'm just not sure about the hardness/strength of the airframe bolts and can't find any info online about that. Just wondering if anyone else had used them. Thanks!
I will post some pics this evening of the pneumatic/electronics layout I used in the fuselage. I think it will be fairly efficient and accessible.
Regards,
Mark
So, the question is, does anybody know if an airframe bolt with the correct 13/16" grip length (smooth, unthreaded part of the bolt) would be okay to substitute for an axle? I'm just not sure about the hardness/strength of the airframe bolts and can't find any info online about that. Just wondering if anyone else had used them. Thanks!
I will post some pics this evening of the pneumatic/electronics layout I used in the fuselage. I think it will be fairly efficient and accessible.
Regards,
Mark
#256
RE: C-ARF Ultra Flash build Thread + Video
A few pictures on where I put the components in the fuselage. Generally, the ECU, solenoids and pneumatic stuff is on the left side, retract and brake valves and servos on right, Smart-Fly Power Expander in center in front of the UAT. The last picture shows where I had to relieve a little of the bulkhead and remove the nosewheel steering retract mechanism to get the air tank into the nose.
Regards,
Mark
Regards,
Mark
#258
Thread Starter
RE: C-ARF Ultra Flash build Thread + Video
ORIGINAL: mtnflyer14
A few pictures on where I put the components in the fuselage. Generally, the ECU, solenoids and pneumatic stuff is on the left side, retract and brake valves and servos on right, Smart-Fly Power Expander in center in front of the UAT. The last picture shows where I had to relieve a little of the bulkhead and remove the nosewheel steering retract mechanism to get the air tank into the nose.
Regards,
Mark
A few pictures on where I put the components in the fuselage. Generally, the ECU, solenoids and pneumatic stuff is on the left side, retract and brake valves and servos on right, Smart-Fly Power Expander in center in front of the UAT. The last picture shows where I had to relieve a little of the bulkhead and remove the nosewheel steering retract mechanism to get the air tank into the nose.
Regards,
Mark
I think the threads are M6 and can be cut using a die to sort the issue.
Dw
#262
Senior Member
My Feedback: (1)
Join Date: Feb 2004
Location: UnionvilleOntario, CANADA
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
RE: C-ARF Ultra Flash build Thread + Video
Anyone know if C-ARF plans to come-out with additional paint schemes? I like boring colour schemes and although I like the Blue Angel scheme I figure it would be hard to see in a blue sky. I liked they Thunderbird scheme on the old flash.
Cheers
Cheers
#263
Senior Member
Join Date: Jan 2007
Location: tampa,
FL
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
RE: C-ARF Ultra Flash build Thread + Video
i am sure they could do a thunderbird scheme because they already have it. you will have to check with a rep to see if there going to offer custom schemes...
#264
RE: C-ARF Ultra Flash build Thread + Video
ORIGINAL: ricardinho
i am sure they could do a thunderbird scheme because they already have it. you will have to check with a rep to see if there going to offer custom schemes...
i am sure they could do a thunderbird scheme because they already have it. you will have to check with a rep to see if there going to offer custom schemes...
Wouldn't this look sweet with a swept wing?
#265
RE: C-ARF Ultra Flash build Thread + Video
ORIGINAL: ricardinho
hello any ideas on pilot sizes for this plane. i was thinking something funny not scale... thanks pat
hello any ideas on pilot sizes for this plane. i was thinking something funny not scale... thanks pat
The 1/6 scale pilot is 12 inches, so Im guessing a 10 inch tall doll or so
#266
RE: C-ARF Ultra Flash build Thread + Video
We test flew my Ultra flash last weekend. Its has a classic P120 from 5 years ago. IMHO, this is the smoothest nicest flying aircraft I have ever owned... and I have owned a lot.
Cheers
Anurag
#267
Thread Starter
RE: C-ARF Ultra Flash build Thread + Video
Anurag
That's great! it is smooth for sure. We have a few being finished at this time ready for the season ahead.
Colour schemes-most are available to order, the red Cheque scheme is available for sure, I've ordered a colour swop (same scheme different colours) talk with your reps and they can sort most things. But yes the T Bird scheme will suit it!
Dw
That's great! it is smooth for sure. We have a few being finished at this time ready for the season ahead.
Colour schemes-most are available to order, the red Cheque scheme is available for sure, I've ordered a colour swop (same scheme different colours) talk with your reps and they can sort most things. But yes the T Bird scheme will suit it!
Dw
#271
Thread Starter
RE: C-ARF Ultra Flash build Thread + Video
ORIGINAL: canenr
Look what showed up at my front door!
Look what showed up at my front door!
What equipment did you decide on?
Dw
#273
Member
Join Date: Jun 2008
Location: st catharines,
ON, CANADA
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
RE: C-ARF Ultra Flash build Thread + Video
So far the plan is: Jet Central Cheetah turbine 31lbs
JR8411 servos all around
Dreamworks ProLink struts and wheels
Futaba 12Z radio
JR8411 servos all around
Dreamworks ProLink struts and wheels
Futaba 12Z radio