Backdraft 8E on Masher 40 series!
#1
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Dec 2010
Location: Quebec City,
QC, CANADA
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
Backdraft 8E on Masher 40 series!
Don't worry folks, I was just curious about the look so I installed my old Masher 40 series (removed from my E-Revo).
I will not run these wheels on my BD8E :P
http://www.godrakkargo.com/junk/rc/bd8e/BD8E_Masher40_1.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_2.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_3.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_4.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_5.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_6.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_7.jpg
I will not run these wheels on my BD8E :P
http://www.godrakkargo.com/junk/rc/bd8e/BD8E_Masher40_1.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_2.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_3.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_4.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_5.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_6.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_7.jpg
#5
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Dec 2010
Location: Quebec City,
QC, CANADA
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
RE: Backdraft 8E on Masher 40 series!
ORIGINAL: lcbe
i don't see the picture
i don't see the picture
http://www.godrakkargo.com/junk/rc/b...Masher40_1.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_2.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_3.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_4.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_5.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_6.jpg
http://www.godrakkargo.com/junk/rc/b...Masher40_7.jpg
#8
Senior Member
Thread Starter
My Feedback: (1)
Join Date: Dec 2010
Location: Quebec City,
QC, CANADA
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
RE: Backdraft 8E on Masher 40 series!
ORIGINAL: rchobbyunlimited
Sweet!!!!!!!!!!! does it take a wider radius to turn?
Sweet!!!!!!!!!!! does it take a wider radius to turn?