Help no elevator on my new eurofighter
#1
Junior Member
Thread Starter
Join Date: Feb 2011
Location: Elk Grove,
CA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Help no elevator on my new eurofighter
Anyone have any idea's on mixing...... everything elseworks rudder.motor, aileronjust no up or down only. I have a new Spektrum dx-5 radio and reciever in it I also switched the mixing switch to on still nothing. Any idea's? Thanks
#2
My Feedback: (1)
Join Date: Apr 2009
Location: washington twp.,
MI
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help no elevator on my new eurofighter
I'm confused. You can not mix anything with a DX5 Transmitter? Need more info.
1. Do you have a DX5e transmitter?
2. Are you using a AR500 RX?
3. How do you have your servos set up and which servos do you have pluged into which channels?
1. Do you have a DX5e transmitter?
2. Are you using a AR500 RX?
3. How do you have your servos set up and which servos do you have pluged into which channels?
#3
My Feedback: (21)
Join Date: Jul 2002
Location: Spencerport, NY
Posts: 7,350
Likes: 0
Received 0 Likes
on
0 Posts
RE: Help no elevator on my new eurofighter
The DX5e has delta wing (elevon) mixing.
One elevon servo goes in the aileron channel. The other goes in the elevator channel.
I suspect you have the two elevon servos plugged into the two aileron connections on the AR500 receiver. That won't work.
HUGE HINT: If you can't get the elevons to go in the right direction, no matter how you change servo reversing, try swapping the aileron and elevator plugs at the receiver.
One elevon servo goes in the aileron channel. The other goes in the elevator channel.
I suspect you have the two elevon servos plugged into the two aileron connections on the AR500 receiver. That won't work.
HUGE HINT: If you can't get the elevons to go in the right direction, no matter how you change servo reversing, try swapping the aileron and elevator plugs at the receiver.