Go Back  RCU Forums > Radios, Batteries, Clubhouse and more > RC Radios, Transmitters, Receivers, Servos, gyros
Reload this Page >

HobbyPartz CT6B or Turnigy 9X? The need for screen?

Community
Search
Notices
RC Radios, Transmitters, Receivers, Servos, gyros Discussion all about rc radios, transmitters, receivers, servos, etc.

HobbyPartz CT6B or Turnigy 9X? The need for screen?

Thread Tools
 
Search this Thread
 
Old 02-18-2011, 07:28 AM
  #1  
CreemCheese
Junior Member
Thread Starter
 
Join Date: Jun 2004
Location: , OH
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
Default HobbyPartz CT6B or Turnigy 9X? The need for screen?

I've decided I'm too indecisive, so I'm asking everyone else to make up my mind.

Should I go with the CT6B from hobbypartz or the Turnigy 9X from HobbyKing?
At this point, I am only into off-road, so number of channels isn't an issue. I currently have 1 buggy, but will be getting at least 1 more in the future. I may also get into flying, haven't completely decided on that, yet. I've narrowed my radio choices down to these 2. I'm just not sure if having the screen would really be worth the cost, as it would be 3x the price of the hobbypartz one.

Cost is a the main concern, but I also want to get the most for my money. So, what would you do?

http://www.hobbypartz.com/79p-ct6b-r6b-radiosystem.html

http://www.hobbyking.com/hobbyking/s...idProduct=8991

Thanx,
Justin
Old 02-19-2011, 08:23 AM
  #2  
Texastbird
 
Texastbird's Avatar
 
Join Date: Jul 2002
Location: La Porte, TX
Posts: 1,217
Likes: 0
Received 2 Likes on 2 Posts
Default RE: HobbyPartz CT6B or Turnigy 9X? The need for screen?

What about one of these for the cars? Then you could worry about the airplane stuff later.
http://www.hobbyking.com/hobbyking/s...dProduct=10608
they have some in the US warehouse for a few bucks more. I'm not a car guy, but you only need 2 channels for most cars, right?
Old 02-19-2011, 09:24 AM
  #3  
CreemCheese
Junior Member
Thread Starter
 
Join Date: Jun 2004
Location: , OH
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
Default RE: HobbyPartz CT6B or Turnigy 9X? The need for screen?

Thank you, but

I need it to be a stick radio. I have a disease that makes my hands shake (similar to parkinsons) and I've had issues with pistol grips. So, by holding the tx with both hands, as well as using a finger and thumb on the sticks, I will have much more control.
Old 02-19-2011, 12:46 PM
  #4  
blvdbuzzard
 
Join Date: Jun 2002
Location: high deserts, CA
Posts: 3,717
Likes: 0
Received 4 Likes on 4 Posts
Default RE: HobbyPartz CT6B or Turnigy 9X? The need for screen?

I like chocolate milk. From Fosters home for imaginary friends.

Of the two listed, I would say the 9X. It has a lot more useful features and will do a lot more. If you can wait for it, I would go that way. Plus there is a ton of things you can do with it. You can reprogram it for better mixing and add features.


Buzz.
Old 02-19-2011, 03:27 PM
  #5  
Texastbird
 
Texastbird's Avatar
 
Join Date: Jul 2002
Location: La Porte, TX
Posts: 1,217
Likes: 0
Received 2 Likes on 2 Posts
Default RE: HobbyPartz CT6B or Turnigy 9X? The need for screen?

Ok, I understand now. This one looks a lot like my Futaba 9C. Looks like it could be a good radio for the money.
http://www.hobbyking.com/hobbyking/s...idProduct=8992
Old 02-19-2011, 09:02 PM
  #6  
CreemCheese
Junior Member
Thread Starter
 
Join Date: Jun 2004
Location: , OH
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
Default RE: HobbyPartz CT6B or Turnigy 9X? The need for screen?

If only it was instock I guess it gives me an excuse to pick up a few other things first.
Old 02-19-2011, 09:37 PM
  #7  
crazy8s
Senior Member
My Feedback: (21)
 
Join Date: Apr 2005
Location: Morrisville, PA
Posts: 240
Likes: 0
Received 0 Likes on 0 Posts
Default RE: HobbyPartz CT6B or Turnigy 9X? The need for screen?


ORIGINAL: CreemCheese

If only it was instock I guess it gives me an excuse to pick up a few other things first.
Do NOT wait to order it until it says "in stock" or you'll never get it. When they get them in they're gone in a heartbeat!! Just order it now and you'll have one in a few weeks.
Old 02-20-2011, 06:03 AM
  #8  
CreemCheese
Junior Member
Thread Starter
 
Join Date: Jun 2004
Location: , OH
Posts: 24
Likes: 0
Received 0 Likes on 0 Posts
Default RE: HobbyPartz CT6B or Turnigy 9X? The need for screen?

Thank you for the advice. Do you know if they charge now, or when it is shipped?
Old 02-20-2011, 04:32 PM
  #9  
crazy8s
Senior Member
My Feedback: (21)
 
Join Date: Apr 2005
Location: Morrisville, PA
Posts: 240
Likes: 0
Received 0 Likes on 0 Posts
Default RE: HobbyPartz CT6B or Turnigy 9X? The need for screen?


ORIGINAL: CreemCheese

Thank you for the advice. Do you know if they charge now, or when it is shipped?
If I can remember, and it was 6 months ago when I ordered mine when it was out of stock and received it within 3 weeks, I think my credit card wasn't charged till they shipped it but don't quote me on that!!!
Old 02-23-2011, 09:40 PM
  #10  
robonave
Member
 
Join Date: Feb 2006
Location: Vittorio VenetoTreviso, ITALY
Posts: 43
Likes: 0
Received 0 Likes on 0 Posts
Default RE: HobbyPartz CT6B or Turnigy 9X? The need for screen?

Sorry no! They charge at once, infact one order of mine had out of stock materials, I paid for them but after a month waiting I cancelled the order and get a credit for the same ammount.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.