csbdr

My Feedback: (1)

Hello all! New to this with my 1st truck, so bear with me....I was out the other day and think the turning radius of this truck is very large, like 5 feet (so 10 ft - ish diameter to come around 180*)at full lock. That's really poor. My son's evader ext2 is much better. How/what do I adjust to improve this? Like the truck otherwise. Ican't wait for my next paycheck so I can start shopping for things to mod.

csbdr

My Feedback: (1)

hmmmm.....maybe not quite that bad, but at least 8. It took 2/3 the width of our road to come around.

csbdr

My Feedback: (1)

Noone?

rclugnut10

My Feedback: (1)

it sounds like the dual rate on your radio is turned out, with the wheels off the ground turn the wheel and see how far they move, compair it to the EXT's i'm going to geuss the DT's don't go as far, play with the dual rate knob on the tx, (it's probally labled D/R) and you should get there...

or your servo may be burnt out, but try the dual rate first, thats more than likely it...


also don't expect an answer in 6 hours a little unrealistic especailly during the day when people have work...

the lug

csbdr

My Feedback: (1)

Thanks for the tip!  I'll give that a try.

Apologies about the other.  I saw 20 or 21 views and no ideas....

rclugnut10

My Feedback: (1)

views is just how many people see it weather they're a member or not, and i think it'll count if the tread gets hit by a search engine tooo

the lug