glider kits
#1
Member
Thread Starter
Join Date: Jul 2004
Location: Suffern,
NY
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
glider kits
recommendations on glider kits beginner to intermediate
i have flown planes and heli but would like to learn gliders
i am planning to buy a radian and poss the radian pro..
just looking to build a kit
i was thinking of the bird of time but that one might be above my pay grade
thanks
i have flown planes and heli but would like to learn gliders
i am planning to buy a radian and poss the radian pro..
just looking to build a kit
i was thinking of the bird of time but that one might be above my pay grade
thanks
#4
Member
Thread Starter
Join Date: Jul 2004
Location: Suffern,
NY
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
RE: glider kits
Thanks all the few places i can fly is at the flying club or school ball fields and i know of a few lakes no people just bears.
hand launch and poss a high start (looks like fun)
i do have my eye on the spectra,, GL,, or the BOT..
hand launch and poss a high start (looks like fun)
i do have my eye on the spectra,, GL,, or the BOT..
#7
RE: glider kits
gentle lady as stated above 2 meter and can win contest.tail is stronger than the sophisticated lady.olympic 650 72" span if space is a problem.featured in rcm soaring book
#9
Senior Member
RE: glider kits
The BOT would make a good third or fourth build but shouldn't be taken on by a beginner. It has some tricky parts to it and might turn someone that has limited experience off from building. A build should be a fun thing to do, not a second job.
One of the easiest kits to build would be someting like a House of Balsa 2X6. Easy build and a fairly good flier when trimmed out correctly. The main trick to building them is to keep it as light as possible in the tail feather area. It has a flat bottom airfoil which gives it pretty good lift and it can be ballested up when the wind picks up. Granted it won't handle a full on winch launch, but it's not designed for that. One of the best points about the kit is that it's not expensive and can be bought through just about any good hobby shop.
Which ever kit you decide to start with, just remember to take your time and build it light and build it straight. Almost everyone here is willing to give advise if you hit a snag in the build and can also help you fix any mistakes (you will make them at some point) without too much pain.
Jeff
One of the easiest kits to build would be someting like a House of Balsa 2X6. Easy build and a fairly good flier when trimmed out correctly. The main trick to building them is to keep it as light as possible in the tail feather area. It has a flat bottom airfoil which gives it pretty good lift and it can be ballested up when the wind picks up. Granted it won't handle a full on winch launch, but it's not designed for that. One of the best points about the kit is that it's not expensive and can be bought through just about any good hobby shop.
Which ever kit you decide to start with, just remember to take your time and build it light and build it straight. Almost everyone here is willing to give advise if you hit a snag in the build and can also help you fix any mistakes (you will make them at some point) without too much pain.
Jeff
#10
My Feedback: (1)
RE: glider kits
The Olimpic 650 is a great first build and is strong enough for a beginner to use a 2 meter high start (Dynaflite has a good one.) It is a little heavier than the Gentile Lady, but this is due to the more robust design. The Oly 650 will fly fine in light to moderate lift and with practice and ballast can even fly on higher wind days. The 2x6 is also a good flyer and easy to build but due to the wing design is not quite as strong as the Oly 650, but should also do fine with a high start. You can also put a power pod on the wing, or build it as an electric.
#11
Senior Member
My Feedback: (3)
Join Date: Sep 2002
Location: OZark,
MO
Posts: 2,694
Likes: 0
Received 0 Likes
on
0 Posts
RE: glider kits
ORIGINAL: invertedthoughts
I've heard the BOT wings are hard to build. I personally have one but it was already built when I got it.
I've heard the BOT wings are hard to build. I personally have one but it was already built when I got it.
I did the Big Bird XL that has the same wing shape and it built nearly as easily as any I have ever built. AND LOOKS COOL. No big deal to build.
#12
Senior Member
My Feedback: (3)
Join Date: Sep 2002
Location: OZark,
MO
Posts: 2,694
Likes: 0
Received 0 Likes
on
0 Posts
RE: glider kits
HI,
I would take a close look at this glider. It has a great design and is specifically looking at the newer builder, yet flies very well AND LOOKS COOL.
Chrysalis and HERE IS A NICE BUILD THREAD to give you an idea of how the building would go.
http://www.rcgroups.com/forums/showthread.php?t=1393114
It can't be stretched to 4 meters but it could be RED (inside glider pilot joke)[sm=spinnyeyes.gif][sm=spinnyeyes.gif]
I would take a close look at this glider. It has a great design and is specifically looking at the newer builder, yet flies very well AND LOOKS COOL.
Chrysalis and HERE IS A NICE BUILD THREAD to give you an idea of how the building would go.
http://www.rcgroups.com/forums/showthread.php?t=1393114
It can't be stretched to 4 meters but it could be RED (inside glider pilot joke)[sm=spinnyeyes.gif][sm=spinnyeyes.gif]
#13
My Feedback: (8)
RE: glider kits
Perhaps you should think of your fields first and then pick a glider that can suit the area. If using a up-start or hi-start, any 2 meter ship made from traditional construction will do, (no foamies). If you want a good easy ship to learn on a gentle lady, sig riser or a spirit 2M are all very nice and easy to build. If you take your time and have paitence, you can build a BoT, yes the wing is a little complicated with placement of ply and balsa sheer webs in the center, but it's a pretty straight forward build if you can understand what the plans show and how it's built. My BoT took about 1 month to build in my spare time, I did mods to it and built the speed version, but it's hard to ballast it now due to the thin fuselage. I would recommend a spirit 2M if you want something that can take a lot of abuse and has good all around performance, if you want a thermal hunter, go with a sig riser or gentle lady.
#14
RE: glider kits
ORIGINAL: planebuilder66
Perhaps you should think of your fields first and then pick a glider that can suit the area. If using a up-start or hi-start, any 2 meter ship made from traditional construction will do, (no foamies). If you want a good easy ship to learn on a gentle lady, sig riser or a spirit 2M are all very nice and easy to build. If you take your time and have paitence, you can build a BoT, yes the wing is a little complicated with placement of ply and balsa sheer webs in the center, but it's a pretty straight forward build if you can understand what the plans show and how it's built. My BoT took about 1 month to build in my spare time, I did mods to it and built the speed version, but it's hard to ballast it now due to the thin fuselage. I would recommend a spirit 2M if you want something that can take a lot of abuse and has good all around performance, if you want a thermal hunter, go with a sig riser or gentle lady.
Perhaps you should think of your fields first and then pick a glider that can suit the area. If using a up-start or hi-start, any 2 meter ship made from traditional construction will do, (no foamies). If you want a good easy ship to learn on a gentle lady, sig riser or a spirit 2M are all very nice and easy to build. If you take your time and have paitence, you can build a BoT, yes the wing is a little complicated with placement of ply and balsa sheer webs in the center, but it's a pretty straight forward build if you can understand what the plans show and how it's built. My BoT took about 1 month to build in my spare time, I did mods to it and built the speed version, but it's hard to ballast it now due to the thin fuselage. I would recommend a spirit 2M if you want something that can take a lot of abuse and has good all around performance, if you want a thermal hunter, go with a sig riser or gentle lady.
If/when you DO build a BoT, there are several good threads already established here in RCU. "The Big Wing Buildalong" is one of the best.
Good luck!
Dave
#15
Senior Member
My Feedback: (3)
Join Date: Sep 2002
Location: OZark,
MO
Posts: 2,694
Likes: 0
Received 0 Likes
on
0 Posts
RE: glider kits
If you choose the Spirit read this FIRST[8D]
http://www.charlesriverrc.org/articl...spiritmods.htm
http://www.charlesriverrc.org/articl...spiritmods.htm
#16
My Feedback: (6)
Join Date: Aug 2003
Location: CA
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
RE: glider kits
I also recommend building a Gentle Lady if your looking for a floater. They are easy to modify to take better winch/histart launches such as adding carbon fiber on the spars or modifying to a bolt on wing. One of my favorite ships was one that my former club used for a 1 design contest. That was the Laser Arts Soveriegn. Its a pod and boom ship with a flat center wing panel and very easy to build with the puzzle like constructed pod. I added a center spoiler for more control. I dont think they sell them anymore but they do still make the jester which is the same ship but with a full fuse. I just remember the quality of the wood being very good on the laser art planes.
Sovereign/Jester Wing
[link]http://www.flickr.com/photos/evlwevl/853084313/in/set-72157600905181210/[/link]
Sovereign/Jester Wing
[link]http://www.flickr.com/photos/evlwevl/853084313/in/set-72157600905181210/[/link]
#17
Senior Member
My Feedback: (3)
Join Date: Sep 2002
Location: OZark,
MO
Posts: 2,694
Likes: 0
Received 0 Likes
on
0 Posts
RE: glider kits
What evlwevl said reminded me of Mountain Models version of THE OLY II. How can you beat a lazer cut Oly II with modernized foils.
http://www.mountainmodels.com/produc...roducts_id=178
http://www.mountainmodels.com/produc...roducts_id=178