Blade MSR motor stuttering
#1
Member
Thread Starter
Join Date: Mar 2011
Location: Ben Lomond, CA
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Blade MSR motor stuttering
I have got 20 flights on this MSR, and no major crashes. The motor is sometimes stuttering, if it were a gas engine it would be like a misfire. Is my motor on the way out? I checked for any loose wires. Everything looks tight. I started having this problem after moving the ball links out to the long swash plate control ball. Maybe the motor was run too hot? I let it cool between batteries, but maybe not long enough? Any help would be greatly appreciated.
#2
Senior Member
My Feedback: (1)
Join Date: Mar 2010
Location: Louisville,
KY
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
RE: Blade MSR motor stuttering
I've always moved from battery to battery with no problem. This includes flying on aftermarket batteries that would allow for well over 10 minute flights. I'd first guess loose connection. Maybe a signal issue? Perhaps an issue with the 5in1?
#4
Member
Thread Starter
Join Date: Mar 2011
Location: Ben Lomond, CA
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
RE: Blade MSR motor stuttering
Could be a signal to buy a mcpx. Crashed my SR today so I don't don't think I'm ready for a mcpx yet. I did fondle one at the hobby shop tho. Nice little heli
#5
Member
Thread Starter
Join Date: Mar 2011
Location: Ben Lomond, CA
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
RE: Blade MSR motor stuttering
Called HH about the stuttering today. They said it could be the motor 's brushes going out. This msr only has 20 flights, send me a new motor. Nope, the motor is a "wear and tear " item. So now I have to fork out $11 each 20 flights for a crappy motor? not happy