ZERO-322

My Feedback: (2)

I'm looking at picking on of these up from VQ warbirds and was wondering if anyone has any experience with this bird ? I was also wondering if anyone knew if the wing is fully sheeted and perhaps a engine suggestion one that would cowl in with minimal if any cutting of the cowl preferably gas ?

mimoore67

My Feedback: (51)

Wing is sheeted!

I will be running a RCV 120SP, with the Keleo Scale Exhaust, Biela Scale 4-Blade Prop, E-Flite 60/120 Retracts.

I bought my from http://www.arfpromodelplanes.com/

Keleo Exhaust http://www.keleo-creations.com/index...roducts_id=170

ZERO-322

My Feedback: (2)

What are the cowl dimensions ? I wanted to start shopping for an engine for it so this spec would be a good starting point

thanks for the help

Mike

mimoore67

My Feedback: (51)

I don't have the dimensions, but if you look at the keleo creations sight, they show several options and most don't protrude to much. Also, there's a couple of build threads on RCU and that "other site." LOL

ZERO-322

My Feedback: (2)

I sure hope you post when you start putting your together !

Oh what other site ? there's another site besides RCU LOL !

mimoore67

My Feedback: (51)

Something groups!

RC Flier

My Feedback: (9)

F/G fuse, F/G center section...both wing panels built up, sheeted and covered with iron-on covering. Not a $1000 kit but OK for $300 or less

ZERO-322

My Feedback: (2)

thanks for the 411 don't suppose you can give me the cowl dimensions ?