Volcano S30
#1
Junior Member
Thread Starter
Join Date: Jan 2011
Location: Cut Off, LA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Volcano S30
I have a volcano S30 and Iwas wondering if someone could help me on tuning the engine as for as when I push the trigger forward for to long the engine dies. I also need help on adjusting the brake. I would like it to stop in a shorter distance and not kill the engine when I push the trigger on the remote forward. Thanks for any help that could be given.
#2
Member
Join Date: Mar 2008
Location: bluffton,
OH
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
RE: Volcano S30
first off im gonna tell you how to fix the break problem.. if the motor is stullin out when you pull the break screw in the idel screw in and then test your breaks to see if the throttle arm moves.. now most ppl will tell you that there should be a 1mm gap in the carb and this is true so make sure you look at that before you start it up so it doesnt take off.. On your breaks all you should have to do is move or tighten the the linkage towards the servo arm.. For the motor, mind you its been awhile sense ive had my redcats, but i think the hsn should be close to 2 1/4 turns out and the lsn was 3/4 of a turn in from flush.... hope that helps