8e turnbuckle size?
#1
Member
Thread Starter
Join Date: Jan 2011
Location: , BC, CANADA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
8e turnbuckle size?
Ok, I have a Caldera 10e and aftershock 8e which use the same turnbuckles. I thought they were 4mm, so I bought a 4mm turnbuckle wrench, but it appears to small. Is it just my wrench that appears wacked, or is it a differnt size?
#3
Member
Thread Starter
Join Date: Jan 2011
Location: , BC, CANADA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
RE: 8e turnbuckle size?
Awsome, thanks......................i'm not sure why they are calling them 4mm turnbuckles then, but atleast now i can order the proper one.
ORIGINAL: yellowjacket45
I just went thru the same issue of finding a wrench to fit these on my backdraft and they take a 4.5mm.
I just went thru the same issue of finding a wrench to fit these on my backdraft and they take a 4.5mm.
#4
Junior Member
Join Date: Mar 2011
Location: Tower Hill, IL
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: 8e turnbuckle size?
the turnbuckle started as a 4.5mm hex andis turned down round leaving only the center hex and then threaded and whats left is 4mm thus a 4mm turnbuckle is created. I bought a 10 pc midget metric wrench set at Menards for $14
#5
Member
Thread Starter
Join Date: Jan 2011
Location: , BC, CANADA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
RE: 8e turnbuckle size?
That makes total sense now.....................I was looking for a similar set of wrenches, but I can't find a set for a reasonable price.
#7
Member
Thread Starter
Join Date: Jan 2011
Location: , BC, CANADA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
RE: 8e turnbuckle size?
We don't have Menards in canada, and HD didn't have the mini-size. I have been looking online, but can only find singles for a reasonable price. I've found sets, but once you add the shipping costs (we get hosed for shipping costs here in Canada for items coming across the boarder), the price is more than I think its worth. I'm gonna keep an eye out at the various well known online hobby stores for the 4.5mm.
#8
Junior Member
Join Date: Mar 2011
Location: Tower Hill, IL
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
RE: 8e turnbuckle size?
Hey 99 before I bought the wrenches I bought a turnbuckle wrench at my LHSthat was too small and took a file to it until it fit the turnbuckles on my jato but unfortunatly it wouldnt fit the redcat ones
#9
Member
Thread Starter
Join Date: Jan 2011
Location: , BC, CANADA
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
RE: 8e turnbuckle size?
ya, i initially bought a 4mm wrench (cause they called the turnbuckles 4mm ones), but soon found out that it actually isn't. I could do as you suggest and file the 4mm wrench to fit.