Tornado tranny help
#1
Member
Thread Starter
Join Date: Feb 2011
Location: Bradenton,
FL
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Tornado tranny help
Sorry for the dumb question in advance...
I have to replace my spur gears in my 2 speed tranny, and was wondering besides the 4 screws that hold the tranny in place...what else do I need to undo to get the tranny out for gear replacement? I only ask because I don't wanna rip apart things that don't need to be messed with. Thanks in advance.
I have to replace my spur gears in my 2 speed tranny, and was wondering besides the 4 screws that hold the tranny in place...what else do I need to undo to get the tranny out for gear replacement? I only ask because I don't wanna rip apart things that don't need to be messed with. Thanks in advance.
#2
Senior Member
My Feedback: (2)
Join Date: Jun 2009
Location: Elgin,
IL
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
RE: Tornado tranny help
http://www.youtube.com/user/alishanm...27/yfdKK4ma_es
The video above will help you; all his videos are helpful.
The video above will help you; all his videos are helpful.
#3
Member
Thread Starter
Join Date: Feb 2011
Location: Bradenton,
FL
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
RE: Tornado tranny help
I'm guessing just undo the grubs out of the drive cups, then the 4 screws holding the tranny in. That didn't show him taking the tranny off the chassis. Thanks for the video though. Anyone else shine some light please...?
#4
Member
Join Date: Mar 2011
Location: HICKORY HILLS, IL
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
RE: Tornado tranny help
i personally have a tornado s30...... to change the spur gear you have to take it off the chasis which means that you have to take the plastic battery box unipart upperr chasis(i think its what its called), anywho, the you have to unbolt the 4 bolts holding the transmission in place.... the you have a free trany