myposrustler

what kind of connecters you have on the batt and how is the motor wired in there with bullets or solderd?

RCmoose

Hey guys If you don't mind me asking where did you get the motor mount from.
Thanks

Sibant

My Feedback: (1)

using deans on the battery and bullets on the esc

teckno rc makes mounts that fit right in the mgt i just had to drill 1 hole

Kylar

My Feedback: (42)

Check all your soldering connections, make sure none are loose, or cold solder joints. If they are all fine then unfortunately there is probably something wrong with the esc. I have the 120a version with the tacon 2000kv and there isnt much cogging at all and it flys!!

Goatcrapp

do you have another battery to test with?  i had a similar issue - but it only happened with one of my batts.  when tested under load (get a volt meter that can apply a load during testing) - the voltage drop was unacceptable.   all my other lipos - ran well.   that problem batt got chucked.  no puffing or anything - just wouldn't hold under load.

Sibant

My Feedback: (1)

was just a ****ty hobby king esc

Hobbyking is the worst company ever to deal with!! after a month of fighting i got my money back then was banned from the site

i advise anyone to stay far away from them

Goatcrapp

i've ordered from them in the past, and the parts were fine..  but it took me like 3 months to get them LOL.    for that alone, i usually shop elsewhere.