need model for electronics
#1
Senior Member
Thread Starter
Join Date: Apr 2010
Location: oakbank,
MB, CANADA
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
need model for electronics
I have the spektrum 2.4 nanolight flightpack with the 6300 rx and 4 servos and a 20 amp esc as well as a 1300 3c battery. I am thinking of the great planes se5a but i'm am not sure that the servos have enough torque.All help is apeiciated
JM
JM
#3
Senior Member
Join Date: May 2010
Location: Amersfoort, , NETHERLANDS
Posts: 274
Likes: 0
Received 0 Likes
on
0 Posts
RE: need model for electronics
For an SE5A you won't need much torque? If your servo's are 9 gram or better, than I am pretty sure they will give you enough torque.
If your battery had a little more capacity, I would even go for this SE5A (for looks): http://www.hobbyking.com/hobbyking/s...dProduct=16601
If your battery had a little more capacity, I would even go for this SE5A (for looks): http://www.hobbyking.com/hobbyking/s...dProduct=16601
#4
Senior Member
Thread Starter
Join Date: Apr 2010
Location: oakbank,
MB, CANADA
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
RE: need model for electronics
Thanks if there is nothing that fits the bill at airventure eaa in oshkosh there will be another GP se5a.
JM
JM