Is this too much power?
08-12-2011, 07:30 AM
#1
Junior Member
Thread Starter
My Feedback: (3)
Join Date: May 2011
Location: baton Rouge,
LA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Is this too much power?
Was thinking of going brusless on my axial scx 10. Can I use a traxxas VXL3s ESC and velineon brushless motor and if so what mods do I need to do?
08-12-2011, 07:33 AM
#2
Senior Member
My Feedback: (11)
RE: Is this too much power?
You will have a lot of wheel speed using the VXL setup.. But you will also blow the center stock drive shafts, so you should upgrade them. I run the VXL setup in my 2.2 scaler and blew the center drive shafts the first time i gunned the throttle.
08-12-2011, 08:01 AM
#3
Junior Member
Thread Starter
My Feedback: (3)
Join Date: May 2011
Location: baton Rouge,
LA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
RE: Is this too much power?
I just want a lil more speed on my crawler. My rooster ESC , every couple of days be needing to be reset. Tired of having to do this and want to fix this problem or upgrade to brushless. This is the reason why i asked about the traxxas in the first place. help is greatly appreciated.
08-12-2011, 08:54 AM
#5
Junior Member
Thread Starter
My Feedback: (3)
Join Date: May 2011
Location: baton Rouge,
LA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
RE: Is this too much power?
so outside the traxxas VXL system , what esc set up you recomend for the axial sxc with out messing things up too much?
