Some Qs.
#1
Junior Member
Thread Starter
Join Date: May 2011
Location: warner robins, GA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Some Qs.
For a shockwave.
i need to find the pins for Wheel Hexes locks. anyone know the part number?
is there anything good about upgrading the Servo?
i need to find the pins for Wheel Hexes locks. anyone know the part number?
is there anything good about upgrading the Servo?
#2
Senior Member
My Feedback: (1)
Join Date: May 2011
Location: Palo,
IA
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
RE: Some Qs.
http://www.redcatracing.com/RC-Cars/Redcat-Parts/08027
You can buy them at any local hobby store though. They're the same as every other brand.
You can buy them at any local hobby store though. They're the same as every other brand.
#3
RE: Some Qs.
yep, the drive pins are the same as what is used on the traxxas 2wd xl-5 or vxl models. any hobby shop should have some in stock.
upgrading a servo can give you quicker/stronger steering.
the stock servos have plastic gears, which can strip. you can upgrade to servos with metal gears.
but on the shockwave there is really no point in doing so unless the stock servos fail/break.
upgrading a servo can give you quicker/stronger steering.
the stock servos have plastic gears, which can strip. you can upgrade to servos with metal gears.
but on the shockwave there is really no point in doing so unless the stock servos fail/break.