KOLM 4 STROKE GAS ENGINES
#26
My Feedback: (29)
RE: KOLM 4 STROKE GAS ENGINES
ORIGINAL: mrbigg
You could buy three ZDZ Super 160's for that price.
ORIGINAL: PlaneKrazee
T.O.M.,
You're always saying people here are too cheap to buy quality engines. Put your money where your mouth is and buy one. The 130 twin is a deal under $3500.00 for a production four stroke engine making 12hp at 8.5 pounds and less than 12.5'' wide. About the same weight and power as a 3W 110 two stroke with cannister mufflers.
Beats the heck out of the prototype engine posted here several years ago! How much was that one?
T.O.M.,
You're always saying people here are too cheap to buy quality engines. Put your money where your mouth is and buy one. The 130 twin is a deal under $3500.00 for a production four stroke engine making 12hp at 8.5 pounds and less than 12.5'' wide. About the same weight and power as a 3W 110 two stroke with cannister mufflers.
Beats the heck out of the prototype engine posted here several years ago! How much was that one?
#27
RE: KOLM 4 STROKE GAS ENGINES
ORIGINAL: PlaneKrazee
T.O.M.,
You're always saying people here are too cheap to buy quality engines. Put your money where your mouth is and buy one. The 130 twin is a deal under $3500.00 for a production four stroke engine making 12hp at 8.5 pounds and less than 12.5" wide. About the same weight and power as a 3W 110 two stroke with cannister mufflers.
Beats the heck out of the prototype engine posted here several years ago! How much was that one?
T.O.M.,
You're always saying people here are too cheap to buy quality engines. Put your money where your mouth is and buy one. The 130 twin is a deal under $3500.00 for a production four stroke engine making 12hp at 8.5 pounds and less than 12.5" wide. About the same weight and power as a 3W 110 two stroke with cannister mufflers.
Beats the heck out of the prototype engine posted here several years ago! How much was that one?
http://www.youtube.com/watch?v=5PnJkBl0Ql8
#28
Senior Member
Thread Starter
Join Date: Mar 2007
Location: SALZBURG, AUSTRIA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
RE: KOLM 4 STROKE GAS ENGINES
I already know some guys who are planing to sell their jets to play the big 3 and 2 Zyl 4stroke sounds in warbirds
#31
RE: KOLM 4 STROKE GAS ENGINES
I have been watching their site for news but there isn't much. They still haven't listed it as a production engine with their other engines.
I know Vogelsang Aeroscale is going to offer Kolm engines soon so maybe we don't have much longer to wait.
Meanwhile watching the [link=http://www.kolmengines.com/IL200-beim-Warbirdtreffen-in-Oberhausen.117.0.html]video[/link] of them zooming around with the IL200 in their highly modified P-51, Galloping Ghost, is about as good as it can possibly get in this hobby.
I know Vogelsang Aeroscale is going to offer Kolm engines soon so maybe we don't have much longer to wait.
Meanwhile watching the [link=http://www.kolmengines.com/IL200-beim-Warbirdtreffen-in-Oberhausen.117.0.html]video[/link] of them zooming around with the IL200 in their highly modified P-51, Galloping Ghost, is about as good as it can possibly get in this hobby.
#33
RE: KOLM 4 STROKE GAS ENGINES
Sounds amazing, bet these will sell even at these prices.
Im sure in the future there will be multi cylinder four stroke gas engines produced all over the world for cheaper, and personally I will have to wait for that day as im only a hobby modeller and the price is out of my budget, but its nice to see and hear what the future holds foreven the more budget aware hobbyist like me.
But I bet its a quality item coming from austria itsa very organised part of the world that does not produce crap, I know i have been there many times and Mayrhofen ismy winter holiday most years, very efficient country compared to UK thats for sure, some of the best quality engineering comes from that part of europe.
As for having to adjust a fewset of tappets, big deal, I was setting tappets when I was 13 years old, anyone with a mild interest in learning how to can do it, if they cant be bothered to learn then they can paya model engine mechanic to do so and give them more business.
Im sure in the future there will be multi cylinder four stroke gas engines produced all over the world for cheaper, and personally I will have to wait for that day as im only a hobby modeller and the price is out of my budget, but its nice to see and hear what the future holds foreven the more budget aware hobbyist like me.
But I bet its a quality item coming from austria itsa very organised part of the world that does not produce crap, I know i have been there many times and Mayrhofen ismy winter holiday most years, very efficient country compared to UK thats for sure, some of the best quality engineering comes from that part of europe.
As for having to adjust a fewset of tappets, big deal, I was setting tappets when I was 13 years old, anyone with a mild interest in learning how to can do it, if they cant be bothered to learn then they can paya model engine mechanic to do so and give them more business.
#34
Join Date: Oct 2005
Location: Herk de StadLimburg, BELGIUM
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
RE: KOLM 4 STROKE GAS ENGINES
I wonder what a cd with the 200's sound would cost, maybe you'l get it for under 100$.
I think cost is really beginnig to be the inhibiting factor for most, after all it's just a hobby.
But if doing paid show's all over the country is your business, maybe (surely) this is what you need.
I think cost is really beginnig to be the inhibiting factor for most, after all it's just a hobby.
But if doing paid show's all over the country is your business, maybe (surely) this is what you need.
#35
My Feedback: (50)
Join Date: Feb 2002
Location: Pasadena,
CA
Posts: 2,097
Likes: 0
Received 0 Likes
on
0 Posts
RE: KOLM 4 STROKE GAS ENGINES
The in-line tripple 4-stroke sounds very nice. The coolest engine I've ever heard was an in-line tripple 2-stroke. That was at Joe Nall and I think is was in a P-51. Hearing that thing warm up was like listening to a Ferrari. If I had the means and ability I would build an in-line four cylinder 2-stroke. If you've been on the water and heard a V8 Evinrude or Mercury 2-stroke outboard, that is also a sweet sound.
#37
Senior Member
Thread Starter
Join Date: Mar 2007
Location: SALZBURG, AUSTRIA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
RE: KOLM 4 STROKE GAS ENGINES
Here you are the full range of the Kolm versions, 150cc 3 cyl also exists..
http://www.kolm-motoren.de/products.html
Here a video of the 50cc SINGLE Fourstroke in my CMPRO Zero 2,10m, weight 11 Kgs... for that weight is it a good performance and sound
http://www.youtube.com/watch?v=n2nxOw9D_pU
and in Tiger Moth:
http://www.youtube.com/watch?v=48NHO...eature=related
http://www.kolm-motoren.de/products.html
Here a video of the 50cc SINGLE Fourstroke in my CMPRO Zero 2,10m, weight 11 Kgs... for that weight is it a good performance and sound
http://www.youtube.com/watch?v=n2nxOw9D_pU
and in Tiger Moth:
http://www.youtube.com/watch?v=48NHO...eature=related
#38
RE: KOLM 4 STROKE GAS ENGINES
The engine in the video they call a Moki is not made in the factory where the well know Moki 2 strokes like the 1.35 and the Moki 2.10. If anyone can prove different....go for it!!! Capt,n
#39
Senior Member
Thread Starter
Join Date: Mar 2007
Location: SALZBURG, AUSTRIA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
RE: KOLM 4 STROKE GAS ENGINES
Hello,
Moki:there exist two moki brand variations
one NOW also called MARK engines,
history: http://www.mr-rc.de/MARK_Motoren.htm there exist a cool inline one: http://www.mr-rc.de/M360B.htm
one that is making the glow and little gassers, http://www.mokiengine.com/
the FOURSTROKE fraction with the MOKI (RCS) radials, boxer, single 4stroke but also 2stroke gassers with high performance you can see them at: http://airworld.de/Englisch/Index.htm
the 50cc moki fourstroke gasser has much less power than 50cc KOLM or Vt42 engines
from airworld is also the big FW 190...
Greetings from Austria
Martin
Moki:there exist two moki brand variations
one NOW also called MARK engines,
history: http://www.mr-rc.de/MARK_Motoren.htm there exist a cool inline one: http://www.mr-rc.de/M360B.htm
one that is making the glow and little gassers, http://www.mokiengine.com/
the FOURSTROKE fraction with the MOKI (RCS) radials, boxer, single 4stroke but also 2stroke gassers with high performance you can see them at: http://airworld.de/Englisch/Index.htm
the 50cc moki fourstroke gasser has much less power than 50cc KOLM or Vt42 engines
from airworld is also the big FW 190...
Greetings from Austria
Martin
#40
My Feedback: (15)
Join Date: May 2003
Location: Iowa City, Iowa (again!)
Posts: 1,579
Likes: 0
Received 1 Like
on
1 Post
RE: KOLM 4 STROKE GAS ENGINES
OK, it's 2012... I'm ready for more info and news on the release date for the IL200.
I'm prepared to sell my Avenger and Tigercat to fit one of these engines into my newest P-51 project!
I could watch (i.e. listen to) that Galloping Ghost video all day!!
I'm prepared to sell my Avenger and Tigercat to fit one of these engines into my newest P-51 project!
I could watch (i.e. listen to) that Galloping Ghost video all day!!
#41
RE: KOLM 4 STROKE GAS ENGINES
Hello Butlern
I am still waiting for my P-51 B ,i hope my Engine come in the next few Weeks .
In the moment no response from Kolm ,,maybe to busy??
Wath are the Manufacter of your P-51
Mine was a ex Gietz Mustang Fibre classic fc-scaleparts
Happy New Year
Fred
I am still waiting for my P-51 B ,i hope my Engine come in the next few Weeks .
In the moment no response from Kolm ,,maybe to busy??
Wath are the Manufacter of your P-51
Mine was a ex Gietz Mustang Fibre classic fc-scaleparts
Happy New Year
Fred
#42
Senior Member
Thread Starter
Join Date: Mar 2007
Location: SALZBURG, AUSTRIA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
RE: KOLM 4 STROKE GAS ENGINES
Hello, here you have some other vids of Kolm engines , Kolm is very busy at the moment and is doing its best to handle all the orders
http://www.enser-klaus.com/index.php...d=81&Itemid=89
production:
http://www.rcmovie.de/video/aa2d6e4d...Die-Produktion
There is coming out a 67cc single fourstroke amazing sound and power:
http://www.kolmengines.de/
Happy New Year
Martin
http://www.enser-klaus.com/index.php...d=81&Itemid=89
production:
http://www.rcmovie.de/video/aa2d6e4d...Die-Produktion
There is coming out a 67cc single fourstroke amazing sound and power:
http://www.kolmengines.de/
Happy New Year
Martin
#43
Senior Member
Thread Starter
Join Date: Mar 2007
Location: SALZBURG, AUSTRIA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
#44
My Feedback: (15)
Join Date: May 2003
Location: Iowa City, Iowa (again!)
Posts: 1,579
Likes: 0
Received 1 Like
on
1 Post
RE: KOLM 4 STROKE GAS ENGINES
Hi, Fred.
My mustang project starts with a Nick Ziroli P-51 plans, 1/4.6 scale, 98 inch wingspan.
I was expecting the cost for the IL200 to be $3800 to $4200 USD. But it was recently suggested that the projected price for the IL200 will be in the range of $5000-6000 USD. If true, then I must seriously reconsider my interest in this motor. Although very, very nice, it's much too expensive for me!
Noah
My mustang project starts with a Nick Ziroli P-51 plans, 1/4.6 scale, 98 inch wingspan.
I was expecting the cost for the IL200 to be $3800 to $4200 USD. But it was recently suggested that the projected price for the IL200 will be in the range of $5000-6000 USD. If true, then I must seriously reconsider my interest in this motor. Although very, very nice, it's much too expensive for me!
Noah
#46
RE: KOLM 4 STROKE GAS ENGINES
Not a reply ...just a question. Has anyone is the USA ordered the 3 cyl Kolm engine and placed it in a airplane? Down here in Florida there are some great fly-ins. I sure would love too see one of these great engines in real life. Thanks very much. Capt,n
#47
Senior Member
Thread Starter
Join Date: Mar 2007
Location: SALZBURG, AUSTRIA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
RE: KOLM 4 STROKE GAS ENGINES
Hei, i got Info that the Kolm Engines are now here available and supported for USA
http://www.team-aeroscale.com/kolm.html
till now i'm very happy with my Kolm-Engines (50cc and 67 cc Single):
http://www.youtube.com/watch?v=n2nxOw9D_pU
http://www.youtube.com/watch?v=-DEbei4nZG8
I collected here some cool Vids of the boxer and 2+ 3Cyl and 4Cyl Inline: (i've become a real fan of that engines and im going to take a inline engine (i sold some other planes of mine )
turn speakers loud, have fun
http://www.youtube.com/watch?v=1Wu0Lz1YHeE
http://www.youtube.com/watch?v=2R84SsZiC7c
http://www.youtube.com/watch?v=TjpG9dACw9c
http://www.youtube.com/watch?v=eKxI7XFrkSo
http://www.youtube.com/watch?v=fAGWa5KLPC0
Martin
http://www.team-aeroscale.com/kolm.html
till now i'm very happy with my Kolm-Engines (50cc and 67 cc Single):
http://www.youtube.com/watch?v=n2nxOw9D_pU
http://www.youtube.com/watch?v=-DEbei4nZG8
I collected here some cool Vids of the boxer and 2+ 3Cyl and 4Cyl Inline: (i've become a real fan of that engines and im going to take a inline engine (i sold some other planes of mine )
turn speakers loud, have fun
http://www.youtube.com/watch?v=1Wu0Lz1YHeE
http://www.youtube.com/watch?v=2R84SsZiC7c
http://www.youtube.com/watch?v=TjpG9dACw9c
http://www.youtube.com/watch?v=eKxI7XFrkSo
http://www.youtube.com/watch?v=fAGWa5KLPC0
Martin
#48
Senior Member
Thread Starter
Join Date: Mar 2007
Location: SALZBURG, AUSTRIA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Kolm Engines are available here http://www.team-aeroscale.com/kolm.html
Here are some nice new vids;
150cc 3Cylinder inline
https://www.youtube.com/watch?v=hswzQx3D0GA
with amazing sound the 100cc 2Cyl long edition Inline with 270° Crankshaft (sounds like a V, the housing is inline, but the Crank is V- designed )
Also available with 135cc
because of the long engine housing (distance to the Prop-Hubs), the engine- weight goes in direction to C.G. and the zylinders wont look out the cowls,
Also available with 135cc
https://www.youtube.com/edit?o=U&video_id=PbJSI4GHPG4
Here are some nice new vids;
150cc 3Cylinder inline
https://www.youtube.com/watch?v=hswzQx3D0GA
with amazing sound the 100cc 2Cyl long edition Inline with 270° Crankshaft (sounds like a V, the housing is inline, but the Crank is V- designed )
Also available with 135cc
because of the long engine housing (distance to the Prop-Hubs), the engine- weight goes in direction to C.G. and the zylinders wont look out the cowls,
Also available with 135cc
https://www.youtube.com/edit?o=U&video_id=PbJSI4GHPG4
Last edited by Flugmax; 11-24-2013 at 12:38 PM.
#49
Senior Member
Thread Starter
Join Date: Mar 2007
Location: SALZBURG, AUSTRIA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
100cc powerful Boxer KOLM Engine
This Summer i also had the 100cc Boxer gas fourstroke KOLM Engine, here a short clip of sound and power, there will soon be specified exaust-systems for all KOLM ENGINES available;
http://www.youtube.com/watch?v=G42cV...Kgim6nNy7hXnxw
and released engine info and dimension pdf: [ATTACH]1950515[/IMG]
Greetings Martin
http://www.youtube.com/watch?v=G42cV...Kgim6nNy7hXnxw
and released engine info and dimension pdf: [ATTACH]1950515[/IMG]
Greetings Martin