Visual ruler - Imperial (64ths) to Metric (0.5 mm)
11-26-2011, 04:23 AM
#1
Senior Member
Thread Starter
Visual ruler - Imperial (64ths) to Metric (0.5 mm)
I created this visual aid because it's helpful to me in the workshop when I need to match a tool to a fastener. For example, if 7/64" is a bit too small and 1/8" is a bit too big, I can see that 3.0 mm is in between.
Feel free to copy and use it.
Feel free to copy and use it.
11-26-2011, 06:38 AM
#4
RE: Visual ruler - Imperial (64ths) to Metric (0.5 mm)
It worked for me also.
I cheat a bit on this....I have a digital calipers that with the push of a button will flip from metric to SAE. Works like a charm
I cheat a bit on this....I have a digital calipers that with the push of a button will flip from metric to SAE. Works like a charm
11-26-2011, 09:30 PM
#7
RE: Visual ruler - Imperial (64ths) to Metric (0.5 mm)
ORIGINAL: carrellh
I do it the hard way... try every tool in the box that "looks about right"
I do it the hard way... try every tool in the box that "looks about right"
