ncalenda

I bought the Rampage XB-E and have a few questions:

1. What is the gear pitch, will the HPI and Castle pinion gears work? What is the shaft size on the stock motor (castle is 8mm).
2. Can I convert the wheel hex adapters to 24mm?
3. How many cell does the stock ESC support?
4. What are the stock gear options to gear up? I see the pinion is 10 and 11 but I want it taller and to have more options to adjust as needed.

Thanks for the help!

St33v3

My Feedback: (1)

I'm pretty sure it's a 5mm shaft.

Yes, with this kit:
http://www.7075rc.flyingcart.com/ind...pid=11&cat_id=


6s


All you need to gear your XBE is on that website:
http://www.7075rc.flyingcart.com/ind...&req=dept&id=1

Kaz the Minotaur

Mod 1.5

ncalenda

thanks guys!

Who sells 1.5 mod harden steal gears? I would like to use the steel spur and a harden steel pinion.

Kaz the Minotaur

kershawdesigns.com
rc-monster.com

St33v3

My Feedback: (1)

http://www.robinsonracing.com/catalo...ss_pinion.html

ncalenda

I saw those but they are for a 8MM shaft. The stock motor comes with 5MM.

Kaz the Minotaur

Kershaw sells a bore reducer also.

St33v3

My Feedback: (1)

Oops, didn't noticed they were 8mm.

ncalenda

Actually, I learned that Rc-monster.com has reducers, so 8MM will work as long as you get the reducer.

[link=http://www.rc-monster.com/proddetail.php?prod=RCMreducer&cat=40]http://www.rc-monster.com/proddetail.php?prod=RCMreducer&cat=40[/link]

RAMTech-HBF-LSF

You can use the RAMTech-RC adapters to run HPI or aftermarket wheels and tires.

[link=http://rampagehopups.com/category.sc;jsessionid=D04EC9E600E1A531F2DF55DCCF9 DC120.qscstrfrnt01?categoryId=31]RAMTech Adapters for XB-E[/link]

nitrosportsandrunner

Kershaw Designs custom Rampage XB-E
[youtube]http://www.youtube.com/watch?v=FweJyUvkZng[/youtube]

RAMTech-HBF-LSF

Yeah, I saws that at the HPI event last year at Irvine Lake. Looks great and has alot of power.